Page History

You can set the following parameters for alarm handling:

The maximum allowed reaction time to an alarm is the length of time from the moment the operator who accepted an alarm for processing exits alarm mode, after which the alarm returns to New status, and the count for the allowed time for ignoring an alarm begins again.

...

To configure alarm handling in the system, you must perform the following steps:

1. Go to Settings → Options → Alarm processing (1-2). 
   

2. In the Time period of operator reaction to alarm field, enter the time during which an operator who accepted an alarm for processing and exited alarm mode without evaluating it must return to alarm mode (3). The minimum value is 2 minutes.

   Info
   title Note
   To take an alarm for processing, it is necessary to switch to the alarm management mode.

   
   

   Info
   title Note
   After an alarm is taken into processing, the time for handling it is not limited.

   
   

3. Set the slideshow interval of alarm layout (4, see Working with Special layoutsSet the maximum dwell time for alarms on the Special Layout (4). After the dwell specified time has elapsed, the alarm will be removed from the layout and its place will be taken by the next one shows, which has not yet been displayed on the layout.

4. Select the alarm classifications for which you want to require comments after accepting which the operator is required to enter a comment (5).

5. Click the Apply button.

...