Page History

...

1. Go to the Access levels tab of the Access Manager window.
   

2. There are two ways to create a new access level:

   1. Right-click in the free area of the access level list and select Create root level in item (1) in the functional menu. In this case, the access level will be created in the root list of access levels.
      
   2. Right-click the folder and select Create access level item (1). In this case, the access level will be created in the selected folder.
      
3. If you select any of the commands, the Edit access level window will open, enabling you with the following actions:
   
   

   1. In the Name field field (1), enter name of the access level (1).

      Info
      title Note
      The name should be unique. If an access level with this the same name has already been created in the system, then while saving, the attempt to save will fail and a corresponding message will be displayed and the access level will not be saved. Also, the name should not contain the following characters: < | >.

      
      

   2. Add link between In the free area of the list of access rules (2), add a rule that links the access point and with the time zone. This can be done in two ways either::

      1. Right-click on a free area of the list of access rules and in the Add link of another type functional menu that opens, select the required reader type from the list.
         Image Added

      2. If it's required to add link for access point of new type, click the right mouse button in free area of access rules list and in the opened functional menu select the Add item and go to step 4. If there is only one access point for which link is not assigned, go to step 4.
         Image Removed
         

         Info

         title	Note

         If links for all created readers

         of this type

         are assigned in the access level, the message about failure to create new link will display because only one link can be added for each reader.

      3. If it's required to add link for reader of such type for which links are already exist in the list, click the right mouse button on the name of link and in the opened functional menu select the Add link of the same type item and go to step 4. If there is only one access point of this type for which link is not assigned, go to step 4.
         Image Removed

   When type of rule is selected, the Search access point window will be opened. In this window all access point are grouped by object types in the ACFA Intellect software. To search for

   1. 1. , or if there is only one available access point from several access points of the same type, then it will be added automatically.

      2. If there are several access points of this type, then the Search access point window will open, which will display all available access points of this type.
         Image Added

      3. To search and select an access point,

   you must

   1. 1. do the following:

   
   Image Removed

   1. 1. Info
         title Note
         The suitable access points are searched automatically as you specify the search parameters.

         
         

         1. Select type of access point from the Type drop-down list if it's required (1).
         2. Select the location of the access point from the Area drop-down list if it's required (2).
         3. Select the location of the access point from the Region drop-down list if it's required (3).
         4. Enter name of access point or its part in the Name field if it's required (4).
         5. Enter ID of required access point in the ID field if it's required (5).
      As a result, a list
      1. 1. After completing the selection of access points
      that meet the entered parameters will be displayed 
      1. 1. , click the OK button (6).
      Double-click the required access points. If the parent object contains several access points, then it is possible to select/deselect all visible access points under the parent object at once:
      1. To select an access point from the list of available access points, double-click on the required object.

      2. To select all

      visible

      1. available access points of this type at once, right-click on

      the parent object and select

      1. the parent object to open the Select all visible

      item

      1. functional menu (

      7

      1. 1).
         

      To

      1. Image Added

      2. You can deselect all selected access points
      ,
      1. by right-
      click
      1. clicking on
      the parent object and select
      1. the parent object to open the Deselect all visible
      item
      1. functional menu (
      8
      1. 1).
         Image Added

         
         

         Info
         title Note
         Select all visible and Deselect all visible commands can be applied only to those access points that are currently displayed in the list of access points. Selected access points are highlighted in bold in the list.

   2. Click OK button when access points are selected (9).

   3. 1. 
         

4. You will go back to the Edit access level window. The panel for configuring the access level will be displayed at the bottom.
   Image RemovedImage Added

5. Access point specified in the search is selected in the Access point drop drop-down list (see step 4) or the first from free access points of selected type. Select the access point through which access will be allowed with configured access level from the Access point drop-down list if it's required (1).
   Click the Image Removed button and go to step 4 if it's required to search for access point.1). You can change it if necessary.
6. If it is necessary to search for access point, click the Image Added button and go to step 3bii. You can also open the search window using the Add button (1), by right-clicking on the selected access point to open the context menu.
   Image Added

7. From the Time schedule drop-down list (3), From the Time zone drop-down list select time zone during which access through the selected access point will be allowed to users with configured access level (2).  Click the Image Removed button if it's required

8. If it is necessary to search for

   required

   time zone

   - see the 

   , click the Image Added button (4) (see Working with the Search for time zone window

    section

   ).

   Info
   title Note
   Time zones are created and configured on the Time zones tab of the Access Manager window - see the Working with time zones in the Access Manager software module section. Also it's possible to use system time zones "Always" and "Never".

   
   

9. Set the Arm checkbox to arm access point after presenting access card by user (35).
10. Set the DisarmDisarming checkbox to disarm access point after presenting access card by user (46).

11. If it's not required to send access cards to controller after presenting access card by user, set the Do not load checkbox (57).

    Note
    title Attention!
    Functions of arming, disarming and sending access cards should be supported by hardware.

    
    

    Info
    title Note.
    Function of the Do not load checkbox can differ depending on the integration module in use. For example, in PERCo-S-20 integration this checkbox enables commission mode.

    
    

12. Repeat steps 3-10 11 for all required links.

13. Click the Save button (68).
    As a result, the created access level will be displayed in the list.
    Image RemovedImage Added

    Note
    title Attention!
    When the user configuration is written to the controller/terminal, only those users will be written whose access level contains at least one access point of the corresponding controller/terminal. For example, if a user has an access point of terminal 1 specified in the access levels, but no access point of terminal 2 is specified, then this user will be written only to terminal 1.

    
    

The creation of the access level is complete.