Go to documentation repository
Page History
Make sure your hardware and software meet the requirements for Axxon NextOne.
No. | Limitation |
---|---|
1 | To work with Axxon Next One software the following requirements for OpenGL are to be fulfilled:
Extensions availability can be checked using the OpenGL Extension Viewer program (download). |
2 | Axxon Next One Client cannot be started if the scale of all items on the screen (DPI) is over 100%. You may have issues with Axxon Next One VMS if the screen resolution is set lower than 1280*960 pixels. |
3 | The Server and Client must be of the same version. If not, Axxon Next One VMS may have issues. |
4 | To install Axxon NextOne, you must log in to Windows as an administrator. |
5 | For proper installation of Axxon NextOne, there should be no spaces at the beginning of the name of the folder which contains the installer |
6 | For all features of Axxon Next One to work properly, the system must not have any restrictions on network activity. If certain ports are specified during installation of Axxon NextOne, TCP and UDP access to these ports should be enabled. Otherwise, access to all ports should be allowed in the system |
7 | Time must be synchronized among all computers in the system (to be configured by the user). |
8 | If you have edge storage enabled in the system, synchronization between the server and the IP device is necessary. Lack of synchronization may lead to bad DB entries of events detected on the edge device. |
9 | Before installing Axxon NextOne, make sure the video card drivers on the computer are fully up to date |
10 | The NetBiosName of the computer may contain up to 15 characters. |
11 | The Client cannot be started on a remote desktop through the Remote Desktop Connection utility built into Windows |
12 | If a computer is linked to an Active Directory domain, one of the following conditions must be met to enable disk access:
|
...