Page History

...

Of all the push-button controls of the remote control, the following blocks are integrated:

• a A block of playback control keys (6 keys on the left: the record button is triggered after pressing a button on the joystick);.
• block Block of keys for control of focus, zoom, aperture and PTZ presets (8 keys);.

The following keys to manipulate the device interface are also available (not related to Axxon One):

...

Configure the network PTZ 4-dimensional Joystick Remote Control from Uniview (KB-1100) before you create the appropriate object in the Axxon One VMS. Proceed as follows:

1. Switch on the control device.
2. Enter username and password in the device display. The default credentials are as follows:
   
   1. login: admin.
   2. password: 123456.
3. Configure the device network configuration. To do this, in the Local Cfg -> Net Cfg menu, set the following settings:
   
   1. IP address.
   2. Mask.
   3. Gateway.

4. Add the Axxon One Server to the internal configuration of this CCTV joystick keyboard. To do this, in the Dev Manage -> Manual Cfg -> Add Dev menu, set the following settings:

   1. ID – enter any number (range: 1-240, the number must not coincide with the ID of the remote control or other already added device).
   2. name – enter a string (1-8 characters).
   3. DType – select VM (VideoManagementSystem, i.e. Axxon One).
   4. LType – select NetWork (the device is integrated for connecting to Axxon One via the network).

   5. After selecting LType, press the button on the joystick and enter the IP address of the Axxon One VMS Server and the port used (the default port is 60000).

5. Connect to the Axxon One VMS, added in the step above. To do this, enter the ID specified above in the FindDev -> Dev ID menu or select the found profile in the Dev Manage -> Search Dev menu.

6. If the device is found, information about it will be displayed on the device display.
7. Press on the ID field. This will onboard the remote control  in the Axxon One VMS.

Setting up the UNIVIEW KB-1100 control device is completed.

...

1. Go to IP Device Discovery Wizard (see Adding and removing IP devices).
2. In the Vendor list select Uniview-joystick (1).
   Image RemovedImage Added
3. In the IP Address field, enter the IP address of the remote control (2).
4. In the Port field, enter the port number, as set in step 4 of the remote control settings configuration (3).
5. Click the Image Removed Image Added.
6. Enable the newly created IP Server and its Channel child object.

...