Page History

One or more video capture card is included into the kit of INTELLECTAxxon PSIM™-based digital video surveillance system.

...

1. Turn the computer off and disconnectthe plug from the mains.
2. Remove the computer case cover.
   

3. Install the video capture card in a free PCI-E X1 slot of the motherboard. Secure the video capture card with a screw.

   Info
   title Note
   Before encasing video capture cards, make sure that your hands are free from static electricity, which can damage computer cards and video capture cards. To prevent damage to the cards, various special antistatic tools may be used (for instance, an antistatic wristband).

    

   Example of FS-6C video capture card installation into a PCI slot.

    

   Example of FS-16 video capture card installation into a PCI-E X1 slot.
   
   
4. Set the computer case cover.
   
5. Connect the interface cable with the numbered BNC-pins to the video capture card.
   
6. Connect video cameras to the interface cable.
   
7. Connect the power cord of the computer case to the mains and turn the computer on.
8. While the operating system is loading, new hardware (video capture card) is found and the monitor displays the Found New Hardware Wizard dialog box.

If INTELLECTAxxon PSIM™ is to be installed on the given computer, then click the Cancel button in the Found New Hardware Wizard dialog box. In this case, the driver of the video capture card is installed automatically during the INTELLECT Axxon PSIM™ software installation.

If INTELLECTAxxon PSIM™ has already been installed and a new video capture card needs to be installed, then install the driver of the video capture card(s) using the Found New Hardware Wizard application (see Installing drivers for video capture cardssection).

...