Go to documentation repository
Page History
...
Use the following macro to add a cruise point to the patrolling route (use separate macro for each point):
Parameters description:
| Parameter name | Description | Value range |
|---|---|---|
| Record route | Shows if the point is the last in the route |
Yes – this is the last point in the route, save the route |
No – another point is expected in the route |
| Speed | The speed of the camera movement to the specified point |
0 – 10 | ||
| Priority | The priority of the command to rotate to the specified preset. See Priorities of PTZ control | Low Medium High |
| Point | The cruise point identifier. Note. If you specify a point number that is more than 1 more than the last one, then the next sequential number will be assigned to the point. For example, point No. 10 cannot be created after point No. 3, the number will automatically be set to 4 |
1 – 31 | |
| Preset | The ID number of the preset corresponding to the cruise point |
| 1 – 255 | |
| Delay | Time period during which the device should stay in the preset |
| 3 – 3600 | |
| Route | Patrolling route identification number. The identifiers can be set in no particular order, for example, the route No. 8 can be created before route No. 3 |
1 – 8 |
Running and stopping the patrolling
...
Overview
Content Tools