Page History

...

1. Update all Servers and Clients in the distributed system to the same Axxon PSIM version.

2. Make sure that your network or firewall settings do not restrict any ports required for Axxon PSIM operation on any Server. See the list of ports by the following link:

   Tip
   Full article: The list of TCP ports used in Axxon PSIM™

   
   

3. Combine all license files into a single license file. It will be used on all servers. To do this, please contact your AxxonSoft manager. Please note that the maximum allowed number of Clients is only limited by the license. Please contact your AxxonSoft manager for details.
4. Create the single common configuration as follows:
   1. Select a Server to be the main Server in the distributed system. Put the single license file you received from the manager to the Axxon PSIM installation folder on this main Server. If you don't have the license file yet, enable the Axxon One PSIM Demo mode as follows:
      1. Shut Axxon PSIM down.
      2. Remove the psim.sec license file from the Axxon PSIM installation folder to any other folder (e.g. to the Desktop).
      3. Pull out the Guardant USB dongle.
      4. Run Axxon PSIM.

   2. Configure the distributed system on the Hardware tab: add all the Servers, Video capture devices and other objects.

      Tip
      Full article: Configuration of hardware

      
      

   3. Configure connections on the Architecture tab: specify all the IP addresses and/or DNS names.

      Tip
      Full article: Configuration of distributed architecture

      
      

   4. Having configured the above, distribute the single license file between all Servers and enable database synchronization on each Server. Synchronize each secondary Server with the main Server. The SQL database of the main Server must be the source of synchronization.

      Tip
      Full article: Database synchronization setup

      
      

   5. If the above configuration was performed in the Axxon One PSIM Demo mode, proceed as follows:

      1. Create a backup copy of the database.

         Tip
         Full article: Creating the database backup copy

         
         

      2. Restore this backup on each Server.

         Tip
         Full article: Restoring database from backup copy

         
         

      3. Put the single psim.sec license file to the Axxon PSIM installation folder on each Server.

...