Page History

Configure the checkbox checkboxes as follows:

1. On the Logic tab, select the required element in the table and click the Edit button.
   Image Modified
2. If necessary, in the Step description field (1), enter the text that will be displayed in the column to the left opposite next to the element.
   Image Modified
   

3. From the Number of elements list (2), select the required number of checkboxes.

   Info
   title Note
   The maximum number of elements is determined by the possible number of columns when displaying you display the logic (see Configuring the display of logic).

4. In the Element name fields (3), enter the names of the checkboxes.
5. From the Number of conditions list (4), select the number of different logics used for to proceed the event handling. In this case, each logic implies a certain set of checkboxes that the operator set. For each such set of checkboxes, it is possible to you can set the next element to display.
6. If it is necessary you want to display the same element for at any possible values ​​of the checkboxes, then set up this element in the Logic group (5). If you use several logics are used, then set up each logic settings in the Logic [N] group (6), where N is the logic number. Do To set it up, do the following:
   1. In the Conditional transition field, select the element that should must be displayed next.
   2. If at the same time it is necessary you also want to execute a macro command, select it from the Macro list.
   3. Select values of Set the values of each checkbox, at which the above actions will be performed.
7. Click the OK button.

Example of displaying the Checkbox element:

Configuring the Checkbox element is complete.