Page History

Axxon PSIM™ software has the facility to transmit PSIMhas the possibility of transmitting the audio signals from microphones to IP - devices and to play them back of playing back the audio signals with loudspeakers or headphones , connected to IP - devices.Audio signal transmission

There are two ways audio signals can be transmitted to IP

...

devices

...

in Intellect:

1. with the help of

...

1. the Audio player interface object;
2. with the help of

...

1. the

...

1.  Voice notification service system object.

The

...

 Audio player object is used to transmit audio signals from the selected microphones

...

to the supported IP

...

devices.

To set up the transmission of audio signals with the help of the Audio player object, do the following:

1. Go to the tab of setting up  Audio player interface object Audio Playersettings panel.
   Image Modified
2. Enter the settings Set the coordinates and the size of the Audio player interface box  interface window, as well as the number of the physical monitor on which the window will be displayed (1).

3. Select From the dropdown Device list, select the required IP - device from the dropdown list Device (2).

4. From the dropdown Channel list Channel, select the required audio signals’playback signals playback channel (3).
5. From the dropdown list in the column Microphone select the object’s name Microphone Number column, select the Microphone object number, from which the audio signal has to be transmitted to the selected IP - device (4). Other columns of the table will fill in automatically.
6. Repeat step 5 for each selected microphone objectrequired Microphone objects.
7. Click the Apply button to save all the changes . (5).

Setup Set up the transmission of the audio signal’s transmission signals with the help of the Audio player object is completed.

Info
title Note.
To activate enable audio signals’ signals transmission from the microphone to the IP - device, click the button (Interception from microphone) in the Audio player interface boxwindow.

The Voice notification service object is used to transmit audio files of in the WAV format to the supported IP - devices. Set Setting up order of the object  Voice notification service object is described in the Setting up the voice notification.