Page History

...

If the Sensor-Relay card is installed on SC3B0N16 (WS216) video capture card, then the Sensor objects are to be created under the  the Video Capture Device object with 00 value of the PCI-channel.

If the Sensor-Relay card is installed on FS-8 video capture card, then the Sensor objects are to be created under the  the Video Capture Device object with 07 value of the PCI-channel.

Image Modified

Sensor objects can be relocated in the object tree. To change the parent Video Capture Device object of the Sensor objects, change the value of the Video Capture Device object on the settings panel of the Sensor object. The value of this parameter is to correspond to the number of the Video Capture Device object (in the object tree) under which the Sensor object is to be located. If the value of the Video Capture Device parameter is changed on the settings panel of the Sensor object, then the object is relocated to the branch of child objects of the corresponding Video Capture Device object.

...

The next figure shows an example of locating the Sensor objects in the object tree when two FS-6 (or FS-16) video capture cards with 4 sensors connected to the first 4/4 Sensor-Relay card and 2 sensors connected to the second one are used. 

Image Modified

When configuring the Sensor objects one is to specify the channel numbers of sensor connection to the Sensor-Relay card according to the numbers of the input connectors.

...

The next figure shows an example of the channel numeration configuration of 4 sensors connected to one 4/4 Sensor-Relay card installed on FS-6 (or FS-16) video capture card (4 ADCs for 4 Video Capture Device objects):

Image Modified

Channels of the second 4/4 Sensor-Relay card are numbered 1-4 according to input connectors.

Example of the channel numeration configuration of sensors connected on the second (next) 4/4 Sensor-Relay card installed on FS-6 (or FS-16) video capture card (4 ADCs for 4 Video Capture Device objects):

Image Modified