Page History

The PS-RTP Server server enables the following functions in Intellect:

1. In From the third-party software, control the cameras, PTZ, relays and sensors configured in Intellect using theGB28181 protocol.
2. Watch live and archived video in the third-party software.
3. According to Depending on the user rights, limit access to the functions listed above.

Intellect acts as a subserver in the server hierarchy. If Intellect is to act should act as a supserver, configure Connecting cameras via the GB/T28181 protocol.

Configure the PS-RTP server Server as follows:

1. Create a the PS-RTP server object under the LOCALHOST object Server object on the basis of the Computer object in the Hardware tabof the System settings dialog box.
2. The settings panel of the object is displayed in the Main tab (1) on the right of the System settings dialog box (1). Here the parameters of the PS-RTP server that acts Server as a subserver are set.
   Image Modified
3. In From the IP : dropdown list drop-down list (2) select the address of the network interface via which the third-party software will access the PS-RTP serverServerusing theGB28181 protocol (2).
4. In the Port field (3) specify the number of the port to which the third-party software will be connected using theGB28181 protocol (3).
5. In From the Transport dropdown list drop-down list (4) select a data transfer protocol: UDP or TCP (4).
6. In the Server ID field (5) the id ID of Intellect server is shown – it displayed. It is used in by the third-party software to connect to the RS-RTP server Server via the GB28181 protocol (5).
7. In the from: (6) and to: (7) fields set the range of the RTP ports used by the module.
8. Specify the list of objects the access to which is to should be guaranteed by the RS-RTP server Server as follows:
   1. Go to the Device list List of devices tab (1).
      
   2. In From the Type dropdown list drop-down list (2) select the type of object created in the Intellect object objects tree (2).
   3. In From the Name dropdown list drop-down list (3) select the name of the required object (3).
   4. In the Device ID field (4) the device id is shown – it ID is displayed. It will be used in by the third-party software to control objects via the GB28181 protocol (4).
   5. Repeat steps b-d for all required devices.
9. Set the parameters to connect Intellect to edge the external supserver:
   1. Go to the Edge supserver connection Connection to external server tab (1).
      Image Modified
   2. Set the Edge Connect to external server connection checkbox checked (2). As a result edge , the external server connection parameters are available for editing.
   3. In the IP field (3) specify the edge external server IP - address (2).
   4. In the Port: field (4) specify the edge external server connection port (3).
   5. In the Transport field (5) select a the transport protocol used for edge the external server connection (5).
   6. In the Login: Password field (6) specify the username password for edge external server connection (6).
   7. In the Password Login field (7) specify the password username for edge the external server connection (7).
   8. In the Server ID field (8) specify the id ID of the edge external server via the GB28181 protocol (8).
   9. To save settings click the Apply button.

The RS-RTP server Server is now configured.