Page History

...

1. To activate panoramic view, in the Activate list(1), select Yes.
   

2. In the Video camera position list(2), select the mount of the video camera.

   Note
   title Important!
   Some system features and functions depend on the chosen position of the video camera: digital zoom, display of video in the surveillance sector on the map, and immersive mode.

   
   

3. If it is a fisheye camera, select the Common fisheye-lens lens type (3).If it is a video camera with a panomorph lens, select the corresponding type(3). When using wide angle dual lens XingYun devices, select the Double sphere fisheye-lens type.

   Info
   title Note
   The types of device lenses certified by ImmerVision are listed in the document.

   
   

4. If it is a video camera with an Immervision lens, select the appropriate display mode (4): 360^о panorama with virtual PTZ (PTZ) or 180^о panorama (Perimeter).

5. A typical fisheye lens with standard settings produces a skewed image in the upper part of the screen. If this is the case, enable the Fit to frame option (5).

   Note
   title Important!
   If you have multiple streams from a camera, you need to calibrate each stream. To do this, before applying the settings, switch to the required stream tab in the viewing tile (see The Video Camera Object).

   
   

   Note
   title Important!
   Video is calibrated  calibrated every time you change any parameters in the the Panomorph group.

   Manual calibration is also available. To do this:

   1. Disable Fit to frame, select No in  in the Enable  list list and click the Apply button.

   2. Select Yes in the Enable list.

   3. Configure the video area (circle). Left-click any point inside the circle and move the mouse pointer. To change the diameter of the circle, do as  as follows: click an anchor point Image Removed and Image Added and move the mouse pointer.
      
   4. Click the Apply button.
      

      After applying the settings, the area outside the circle will be cut.

...