Page History

To change the Server configuration, do the following:

1. Execute Run the following command.

   Code Block
   sudo dpkg-reconfigure axxon-next

   
   

2. Enter the Axxon-domain ID to which the Server should be added.  To To skip this step, press the Enter button.
   Image Modified
3. Change the Server node name. 
   Image Modified
4. Specify the beginning of the port range beginning for the Server operation.
   Image Modified
5. Specify the number of ports for the Server operation.
   Image ModifiedSpecify the database operation port.Image Removed
6. Restrict the visibility of Servers from various networks in the Servers list during the Axxon Next setup. Possible values:
   1. "0.0.0.0/0 " -  − Servers from all networks will be visible.
   2. "10.0.1.23/32,192.168.0.7/32 " - Only − only the Servers from the specified networks will be visible.
   3. "127.0.0.1 " - Only − only the Servers from the local network will be visible.
      
   Image Removed
   1. Image Added
7. Specify the alternative Server address − Set the external address of the switch if the Server is located behind the NAT (1). Use the following settings format: "IP Address 1 or DNS Name 1, IP Address 2 or DNS Name 2"
   Image Removed. The format of interfaces setting: IP Address1 or DNS Name1, IP Address2 or DNS Name2.
   Image Added
8. Select the Server log level (see Configuring Logging Levels).
   Image Added
9. Specify the address of the database Server.
   Image Modified
10. Specify the port of the database operation.
    Image Added
11. Specify the maximum time in days the log will be stored in the archive. After that time, the log will be deleted (see Configuring a Log Archive).
    Image Added
12. Specify the maximum size of the archive, above which the earliest logs will be deleted from the archive (see Configuring a Log Archive).
    Image Added

Server configuration change is complete.