Page History

...

1. Go to the Train detection control panel.
   Image Modified
2. Click the Settings button. The Detection settings windows will open.
3. Specify the surveillance area on the video image:
   1. Click the Stop video button to capture the video image (1).
      Image Modified
   2. Click the Surveillance territory Area of interest button (2).

   3. On the captured video image (3) sequentially specify sequentially specify nodal points of area to be analyzed by clicking the left mouse button (14). It is possible to add only one area. While attempting to add the second area the first one will be deleted. After area specifying the remaining part of video image will be darkened.
      Image Modified

      Info
      title Note.
      To remove the area click the Image Removedthe Image Added button next to the Surveillance territory button Area of interest button.

      
      

      Info
      title Note.
      The surveillance territory is to be specified in such a way as to be no any motion in it except of the train motion.

      
      

      Note
      title Attention!
      Setting the Surveillance territory the Area of interest is a mandatory requirement for the detection module operation.

      
      

4. Go to the Setting  Parameters tab (45) and do the following:
   Image Modified 
   1. In the Number of Frames processed frames per second (second [0.016-,100)] field (56), set the number of frames per second that will be processed by the detection tool.

   2. Click the OK button to save changes and return to the control panel of the Train detection  (67).

      Info
      title Note.
      To return to the control panel of the Train detection without saving changes, click Cancel.

      
      

5. Click Apply on the Train detection control panel.

...