Versions Compared

Old Version 1

changes.mady.by.user Alina Luchkina

Saved on

compared with

New Version 2

changes.mady.by.user Alina Luchkina

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To configure the action, set up do the parametersfollowing:

  1. Select a PTZ device that you want to use from the PTZ list (1) − select a PTZ unit. Any pan/tilt positioners/ PTZ cameras can be used, including those from other Servers (if they are on).
    Image RemovedImage Added
  2. Select the preset Preset number (2) − select the camera preset to go to, when the macro starts.to which you want to switch when a macro is triggered.
  3. Set the rotation speed of the camera (3). The Speed (3) − panning speed. This value should be in the range [1, 100]; 100].

  4. Set the control priority of the camera (4). The priority determines the user with which access level (see Creating and configuring roles) will take over the control of the camera when the macro is running. 

  5. Set time (5). If the macro is running and the user has a lower access level than the macro, the user will be able to control the PTZ camera only after this time has elapsed.

Info
titleNote

In order to create a sequential switching to specified presets at selected time intervals (5), set Wait till previous action finishes between the switching actions. You can also set Wait for timeout. In this case, the switching between the presets will take place after the timeout time.