Page History

...

The Email E-mail notifier object is used to configure the electronic messages, which then can be sent to the user when a macro or an automatic rule is triggered.

Creating the

...

E-mail notifier object

To create the Email E-mail notifier object, do the following:

1. In the list of devices, click Create and select Email notifier.
   

2. Click the Apply button.

The Email E-mail notifier object will appear in the list of devices.

Configuring the

...

E-mail notifier object

To configure the Email E-mail notifier object, do the following:

1. In the list of devices, select the Email notifier object which needs to be configured (1).
   
2. Activate the Email notifier object by selecting Yes in the Enable list (2).
3. In the Name field (3) enter the required name of the Email E-mail notifier object.

4. Select the mode for sending the eE-mail notifications: through AxxonNet or through the specified SMTP server Server (4).

   Note
   title Attention!
   To send notifications through AxxonNet, you should connect to it (see Connecting Axxon Domain to Configuring a domain in AxxonNet). AxxonNet has a limit of 10 messages a day.

   
   

   Info
   title Note
   Message through AxxonNet will be sent within a minute.

   
   

5. Configure the SMTP serverServer, if this mode was selected (5):

   1. In the Outgoing mail server field, enter the outgoing email E-mail SMTP serverServer.
   2. In the Password field, enter the password of the user account on the outgoing email serverE-mail Server.
   3. In the Port field, enter the number of the port used by the outgoing email serverE-mail Server.

   4. In the SSL certificate field, specify the path to the SSL certificate file, if you use this protocol. If no certificate is specified, but the Use SSL parameter is enabled, then the email server E-mail Server certificate will be used.

   5. If you need to use SSL-encrypted connection when connecting to the outgoing email serverE-mail Server, select Yes from the Use SSL list.
   6. In the Name field, enter the name of the user account used to send messages on the outgoing email serverE-mail Server.

6. In the From field, enter the email E-mail address from which the messages will be sent (6).

   Note
   title Attention!
   When using email notification, email servers E-mail Servers may disable the user account or deny authentication in some cases. We recommend you to disable all security parameters in your email account beforehand.

   
   

7. In the Recipients field (7), enter one or several email E-mail addresses to which messages will be sent.

8. Click the Apply button.

Configuration of the Email E-mail notifier object is now complete.

Checking

...

E-mail notification

To check the email E-mail notification from the Email notifier object, send a test message by clicking the Test button.

When you do this, the following message will be sent to the email E-mail address specified in the Recipients field (see Configuring the Email E-mail notifier object): "Test message".