Page History

...

№	Parameter	Method for setting the parameter value	Parameter description	Presented as	Default value	Value range
1	Identification number	Automatically	Displays the identification number of the Camera system object in the system	Sequence of numbers	-	From 1 to FaceCamOffset. By default, FaceCamOffset = 50000. The FaceCamOffset value is set using the same-name registry key (see Registry keys reference guide)
2	Name	Enter the value in the field	Sets the name of the Camera object in the system	Latin, Cyrillic and service characters	Camera	A line containing a sequence of any symbols (letters, digits, service characters except > and < symbols), case-insensitive. Number of symbols — from 1 to 60
3	Region	Select the value from the list	Sets the Region structural element, to which this Camera object belongs	Name of the Region objects registered in the system	Region	Depends on the number of the Region objects registered in the system
4	Disable	Set the checkbox	Sets the status (enabled or disabled) of the Camera object in the system	Boolean type	Clear	Set — the Camera object is disabled and isn't in use Clear — the Camera object is enabled and is in use
5	Video capture device	Select the value from the list	Sets the Video capture device parent object for this Camera object	Name of the Video capture device objects registered in the system	Name of the Video capture device parent object	Depends on the number of the Video capture device objects in the system
6	Video	Left-click	Displays video image with the configured settings. When holding down the Shift key on the keyboard, opens the Web-Server page of the IP device in the default browser (doesn't work with Internet Explorer)	Video image	-	-
The Basic settings tab
7	Channel number	Select the value from the list	Sets the number of the channel used to connect a video camera to the video capture board. Corresponds to the number of the BNC connector of the interface cable	Sequence of numbers	1	Depends on the type of the video capture board. Maximum 16 channels
8	Resolution	Select the value from the list	Sets the resolution of the video image frame	List of resolutions of the video image frame	Standard	Standard High Full Specific values depend on the camera model
9	Recording quality	Set the slider in the required position	Sets the quality of the recorded frame. The value is inverse to the video signal compression level	-	Above average	Min — maximum compression level and the lowest video signal quality Max — the lowest compression level and the highest video signal quality
10	Color	Set the checkbox	Set the type of the video image received from the camera (color or black and white)	Boolean type	Set	Set — the image from the video camera is in color Clear — the image from the video camera is black and white
11	The YUV 4:2:2 checkbox	Set the Is set with a checkbox	Set Sets the format of the color representation of the video signal color image.	Boolean type	NoClear	Yes – Set — the video signal will be displayed is represented in the YUV 4:2:2 format.No – Clear — the video signal will be displayed is represented in the YUV 4:2:0 format.
12	The Colorslider	The Set the slider is set in the required position	Set Sets the color saturation of the colored color video image	From From the maximum color saturation to a black and white video .image	Average	Max – — corresponds to the maximum color saturation of the video .image Min – — corresponds to the black and white video .image
13	The Brightness - –Contrast checkbox	Set the Is set with a checkbox	Set Sets the mode for setting adjusting brightness and contrast of the video image	Types of modes for setting adjusting brightness and contrast of the video image	Automatic	Automatic (Position ) - brightness and contrast —Brightness and Contrast parameters are set automatically. Manual (Position ) - brightness and contrast — Brightness and Contrast parameters are set manually. Manual setting with automatic optimization (Position ) - brightness andcontrast — Brightness and Contrast parameters are set manually and , followed by automatic optimization.
14	The Brightness slider	The Set the slider is set in the required position	Set Sets the brightness of the video brightnessimage	From the maximum brightness (white video image) to minimum brightness (black video image)	Average	Max – — corresponds to the maximum brightness of the video .image Min – — corresponds to the minimum brightness of the video .image
15	The Contrast slider	The Set the slider is set in the required position	Set the contrast of the video contrastimage	-	Average	Max – — corresponds to the maximum contrast of the video .image Min – — corresponds to the minimum contrast of the video .image
16	The Sizeslider	The Set the slider is set in the required position	Set Sets the minimum object size triggering of an object at which the main motion detector.detection tool triggers	% in relation to of the screen elevationheight	Average	Minimal – Min — 0% of the video surveillance box window size. Maximum – Max — 100% of the video surveillance box window size
17	The Contrast slider	The Set the slider is set in the required position	Set the minimal minimum contrast of the an object triggering at which the main motion detectordetection tool triggers	-	Less than average	Max – — correspond to maximal maximum contrast of the object Min – — corresponds to the minimal minimum contrast of the object
18	The Record alarms checkbox	Set the Is set with a checkbox	Starts automatic video signal recording on the alarm alarms from the camera	Boolean type	YesSet	Yes – Set — automatic video signal recording on the alarm from the camera is active.No – enabled Clear — automatic video signal recording on the alarm from the camera is not active. disabled
19	The Numberdrop-down list	Select the value Is selected from the list	Sets the number of Microphone the microphone, the audio from which is should be recorded simultaneously with the video signal from the camera.	Number Numbers of the Microphone objects registered in the system.	-	Depends on the number of the Microphone objects registered in the system.
20	The Microphonedrop-down list	Select the value Is selected from the list	Sets the name of Microphone microphone, the audio from which is should be recorded simultaneously with video signal from the camera.	Name Names of the Microphone objects registered in the system.	-	Depends on the number of the Microphone objects registered in the system.
21	The Pre-alarm record field	Enter the value in the field	Set the pre-alarm time period for video recordingthat precedes the alarm record, during which there is pre-event recordingthe prehistory of the event is recorded	Time in seconds (in secs)	-	Recommended time – — from 0 to 20
22	The Post-alarm record field	Enter the value in the field	Set Sets the time period for video recording after alarm registration., during which the video is recorded after an alarm was registered	Time in seconds (sTime (in sec)	-	Recommended time – — from 0 to 20
23	The "Hot - record" time field	Enter the value in the field	Set Sets the time period from the moment the alarm registration or the start of recordis registered or recording begins, during which the video is recorded at the frame rate of recording will comply with the value entered set in the "Hot record" rate field	Time in seconds (in secs)	-	Recommended time – — from 0 to 30
24	The "Hot - record" rate field	Enter the value in the field/select from the list	Set Sets the frame rate of alarm’s the alarm hot recording	fpsFPS	-	Depends on the capabilities of the camera. Recommended time – value — from 0 to 20
25	The Recording frame rate field	Enter the value in the field/select from the list	Set Sets the frame rate for of the video signal recording	fpsFPS	-	Depends on the capabilities of the camera Recommended time – value — from 1 to 25 for PAL From 1 to 30 for NTSC
The Advanced settings tab
26	The Decompressor drop-down list	Select the value Is selected from the list	Set Sets the technology using which the compressed video stream will be decompressed while when displaying the video signal on the monitor. Note. By default the parameter is not available for editing. To change the value of this parameter set the “1” 1 value for the EnableCodecSettings registry parameterkey (see Registry keys reference guide).	The list List of available decompressors	No	BOSCH FfmpegAllInOneDecoder H263IppDecoder H264InterlacedIppDecoder H264IppDecoder MJPEGIpp Motion Wavelet 3.5 Motion Wavelet 7.1 MPEG2IppDecoder MPEG4IppDecoder MxPEG Mobotix RGB24toYUV420 StreamLabs VWV WMVIppDecoder
27	The Compressor drop-down list	Select the value Is selected from the list	Set Sets the algorithm of the video stream compression Note. By default the parameter is not available for editing. To change the value of this parameter set the “1” 1 value for the EnableCodecSettings registry parameterkey (see Registry keys reference guide).	The list List of available algorithms	No	Depends on the camera model
28	The Estimate motion field	Enter the value in the field	Set Sets the threshold of camera’s the camera sensivity to motion depending on the change of object’s the object brightness. Delta The delta frame of the video signal is created by formed according to this criterion.	Sequence of numbers	7	From 2 to 255
29	TheKey frames interval field	Enter the value in the field	Set Sets the rate of the key frames rate.	Sequence of numbers	8	Depends on the capabilities of the camera
The Store at leastno less than group
30	The Store at least fieldStore no less than	Enter the value in the field	Set the time period for keeping the video archive from the camera and also audio archive (with the synchro recordsin case of synchro recording) on the Server. Parameter The parameter allows saving storing the large archive for the selected camera due to size using the archive of other cameras archive. Note. It is better recommended to set the Store at leastparameter not for no less than parameter for no more than 30% of cameras, as this setting is a RECOMMENDED oneonly advisory. If there is not isn't enough space for recording the archive recording, the setting is will be ignored and recording is not stopped the recording won't stop anyway. If more than 10 cameras are created in the system, then while attempting to set when setting this parameter for more than 30% of cameras in the system, the corresponding warning appears after you click the Apply button is pressed. It , a corresponding warning message will appear. It can be disabled using the NotifyAbout_arch_days registry key (see Registry keys reference guide).	Day or hour depending on the value selected in the drop-down list	-	More than 1
31	The Store at least dropdown listStore no less than	Select the value from the list	Sets the units for time period specified in the Store at least no less than field	The list List of available time units	Days	Days Hours
The Store no longer groupmore than group
32	The Store no longer fieldmore than	Enter the value in the field	Sets the time period for storing the camera archive – when . When it is expired, the archive is removed. camear archive should be deleted Note. The archive can be removed deleted before the specified time if it is required for loop recording.	Day or hour depending on the value selected in the dropdown drop-down list	-	More than 1
33	The Store no longer dropdown listmore than	Select the value from the list	Sets the units for time period specified in the Store no longer more than field	The list List of available time units	Days	Days Hours
Not in groups
34	The Additional info field	Enter the value in the field	Set the information displayed on the monitor above the camera name. This information is added to the export file and when the frame is printed, as to the event log	The line not longer than 100 characters	Blank line	Latin, Cyrillic letters and service characters
35	The Type drop-down list	Is selected from the list	Set the type of the camera. The setting affects the type of the icons used to represent the camera on the map	The list of available camera types	-	Fisheye PTZ Standard
36	The Processing priority slider	The slider is set in the required position	Set the priority of video processing	The order of video processing	Normal	Normal – normal video procession order 1/3 – 1/3 procession order 1/2 – 1/2 procession order
37	The Recording priority slider	The slider is set in the required position	Set the priority of video processing in the recording mode	The order of video processing in the recording mode	Normal	Normal – normal video record order 1/3 – 1/3 procession order 1/2 – 1/2 procession order All resources – all ADC resourses are in use for video recording
38	Rotation mode checkbox	Setting checkbox	Enables a function of rotation the video image displayed on the Video surveillance monitor	Boolean type	No	Yes - rotation mode is enabled No - rotation mode is disabled
39	Rotate on drop-down list	Select value from the list	Specifies an angle of video image rotation when the rotation mode is enabled	Numbers	0	0, 90, 180, 270
40	The Lens type dropdown list	Select value in the list	Sets the type of lens in use	Supported lens types	No	No – select if there are no fisheye or anamorphic lenses on the camera. Standard fisheye lens – select if there is a fisheye lens on the camera. Autocalibration – select if there is a fisheye lens on the camera and auto detection of video conversion parameters in order to eliminate artifacts is to be performed. *A0V, A1UST, A8TRT, B0QQV, B4QQV, B5SST, B6SST** – types of panomorph lens.
41	The Camera location dropdown list	Select value in the list	Sets the camera location	Supported camera location modes	Ceiling	Ceiling Wall Floor
42	The Visible part field	Entered into the field	Defines the visible part of the frame on the Video Surveillance Monitor after the dewarp.	Percentage	75% for Ceiling position 66% for Wall position Note. The default value may be not displayed.	0-100
Streams settings tab
43	Streams configuring checkbox	Checking the box	Enables the multistream feature	Boolean	No	True – multistreaming is enabled; different streams can be used for analytics, archiving, and display. False – multistreaming is disabled; a single stream is used for analytics, archiving, and display.
44	# field	Automatically	Shows the stream number	Integer	-	1-10
45	Enabled checkbox	Checking the box	Sets the enabled streams	Boolean	No	Yes – the stream is in use No – the stream is not in use
46	Default checkbox	Checking the box	Assigns the video stream to be displayed both as locally and on remote clients	List of available streams	No	Yes – the stream is in use by default No – the stream is not in use by default
47	Video analytics checkbox	Checking the box	Assigns the video stream used for video analytics (including main motion detection tool). This stream is used by all Intellect detection tools (except embedded video camera detection tools) – including tracking detection tools, motion detection tool, face detection tool, facial recognition tools and detection tools that are the part of Detector Pack.	List of available streams	No	Yes – the stream is in use for video analytics No – the stream is not in use for video analytics
48	Archive checkbox	Checking the box	Sets video stream recorded to the archive not upon alarm – the continuous recording is performed.	List of available streams	No	Yes – the stream is in use for archive recording No – the stream is not in use for archive recording
49	Archive (alarms) checkbox	Checking the box	Sets video stream recorded to the archive upon alarm.	List of available streams	No	Yes – the stream is in use for archive recording by alarm No – the stream is not in use for archive recording by alarm
Main stream tab
50	IP field	Enter the value in the field	Sets the IP address from which the client will receive the video data from the ONVIF Server in the Multicast mode.	IP address	224.0.0.10	224.0.0.0 - 239.255.255.255
51	Port field	Enter the value in the field	Sets the port for transmitting the video data in the Multicast mode.	Numbers	Depends on the number of cameras and streams in the system	Any valid non-busy port numbers. The number of ports is determined by the system administrator.
Video stream tab
52	Purpose field	-	Displays a description of how the video stream is used	String	Depends on the video stream's designated purpose	Most Latin and Russian characters, numbers
53	Resolution dropdown list**	Selected from a list	Assigns the video stream's resolution	List of supported video resolutions	Standard	Standard High Full Particular values depend on the camera model.
54	Speed spinbox**	Typed into a field	Assigns the frame rate of the video stream	Frame rate (fps)	25	Depends on the capabilities of the camera
55	Codec dropdown list**	Selected from a list	Assigns the technology to be used to encode and decode the video stream	List of supported codecs	Depends on the camera model	Depends on the camera model.
56	Key frame rate spinbox**	Typed into a field	Assigns the key frames rate.	Set of natural numbers	8	Depends on the capabilities of the camera
57	Video quality slider**	Moving it to a position	Assigns the frame quality	-	Maximum	Min – maximum compression and minimum video quality Max – minimum compression and maximum video quality
58	Lock disabling streams not in use checkbox	Setting a checkbox	This checkbox is to be set checked if the purpose is not specified for the configured stream but is is in use for recording on command or script.	Boolean	No	Yes – if the stream value is not selected, then the stream is in the sleep mode and it cannot be in use for recording on command or script. No – if the stream purpose is not selected, then it can be in use for recording on command or script.
59	IP field	Enter the value in the field	Sets the IP address from which the client will receive the video data from the ONVIF Server in the Multicast mode.	IP address	224.0.0.10	224.0.0.0 - 239.255.255.255
60	Port field	Enter the value in the field	Sets the port for transmitting the video data in the Multicast mode.	Numbers	Depends on the number of cameras and streams in the system	Any valid unused port numbers. The number of ports is determined by the system administrator.

...

Page tree

Versions Compared

Old Version 12

New Version 13

Key