Page History

...

1. Run the following command.

   Code Block
   sudo dpkg-reconfigure axxon-next

   
   

2. Enter the Axxon-domain ID to which the Server should be added. To skip this step, press the Enter button.
   
3. Change the Server node name. 
   
4. Specify the beginning of the port range for the Server operation.
   
5. Specify the number of ports for the Server operation.
   
6. Restrict the visibility of Servers from various networks in the Servers list during  Axxon Next  setup. Possible values:
   1. 0.0.0.0/0 − Servers from all networks will be visible.
   2. 10.0.1.23/32,192.168.0.7/32 − only the Servers from the specified networks will be visible.
   3. 127.0.0.1 − only the Servers from the local network will be visible.
      
7. Specify the alternative Server address − the external address of the switch if the Server is located behind the NAT. The format of interfaces setting: IP Address1 or DNS Name1, IP Address2 or DNS Name2.
   
8. Select the Server log level (see Configuring Logging Levels).
   
9. Specify the address of the database Server.
   
10. Specify the port of the database operation.
    
11. Specify the maximum time in days the log will be stored in the archive. After that time, the log will be deleted (see Configuring a Log Archive).
    
12. Specify the maximum size of the archive, above which the earliest logs will be deleted from the archive (see Configuring a Log Archive).
    

...