Page History

The following figure shows the settings panel of the Face Recognition Serverrecognition server.

The General settings tab:

Description of settings is given in the following table.

№	Parameter	Method for entering the parameter value	Parameter description	Symbols used	Default value	Value range
The Face Recognition Serverrecognition server group
1	Keep archive of recognized faces (days)	Enter the value into the field	Sets the storage period for the Recognized Faces Archive	days	30	From 1 to 9999
2	Select the best frame for recognition	Set the checkbox	Enables/disables function of selection the best frame for recognition on the Face Recognition Serverrecognition server	Boolean type	Set	Set — the Face Recognition Server recognition server selects the best image for one face from the received images and performs recognition using it Clear — the Face Recognition Serverrecognition server doesn't select the best frame for one face from the received images
The Settings group
3	Similarity level	Enter the value into the field	Sets the similarity level of a captured face and a reference image above which the face is considered recognized	%	50	From 0 to 100
4	Search for similar faces	Enter the value into the field	Sets the maximum number of matching reference images the identifiers and similarity level for which will be stored in the database for one frame with a captured face	units	5	From 1 to 20
5	Minimum quality for face recognition (0-100)	Enter the value into the field	Sets minimum quality for face recognition in percent	%	60	From 0 to 100
6	Minimum quality for adding face to DB (0-100)	Enter the value into the field	Sets minimum quality for face to be added to the database in percent	%	80	From 0 to 100
7	Create FIR in detection unit	Set the checkbox	Enables/disables function of generation biometric face parameters in the Face detection at which the corresponding Face Recognition Server recognition server is selected as external capture	Boolean type	Set	Set — a vector is created in the Face detection and it is sent to the Face Recognition Serverrecognition server Clear — a vector is created on the Face Recognition Serverrecognition server
8	Select the best frame in detection unit	Set the checkbox	Enables/disables function of selection the best frame for recognition on the Face detection site	Boolean type	Set	Set — the Face detection selects the best frame for one captured face among the received images and sends it to the Face Recognition Serverrecognition server Clear — the Face detection sends all frames for one captured face to the Face Recognition Serverrecognition server
9	Skip repeated recognitions, s	Enter the value into the field	Sets time period in seconds during which repeated recognition will be ignored by the system	seconds	2	>2
10	Use GPU	Set the checkbox	Activates the recognition on a discrete graphics card when the Tevian face recognition module is used	Boolean type	Clear	Set — the recognition will be performed on a discrete GPU Clear — the recognition will be performed on a CPU
The Recognize if any of the conditions met group
11	Person left the camera field of view	-	Displays the condition under which the face recognition starts	-	-	-
12	Collected no less than ... frames with person	Enter the value into the field	Sets the number of frames with a person, upon reaching which the face recognition starts	Sequence of numbers	25	>=1
13	Person in field of view no less than … seconds	Enter the value into the field	Sets the time in the camera field of view, upon reaching which the face recognition starts	seconds	5	>=1
The Face size, pixels group
14	Min. width	Enter the value into the field	Sets minimum width of a captured face for face recognition in pixels	Natural number	80	>=0
15	Min. height	Enter the value into the field	Sets minimum height of a captured face for face recognition in pixels	Natural number	80	>=0
16	Max. width	Enter the value into the field	Sets maximum width of a captured face for face recognition in pixels	Natural number	600	>=0
17	Max. height	Enter the value into the field	Sets maximum height of a captured face for face recognition in pixels	Natural number	600	>=0

...

№	Parameter	Method for entering the parameter value	Parameter description	Symbols used	Default value	Value range
1	Access event generation	Set the checkbox	Enables/disables the Pass event generation when the face is recognized	Boolean type	Clear	Set — the event generation is enabled Clear — the event generation is disabled
2	Mask detection event generation	Set the checkbox	Enables/disables the event generation in case the mask is detected on the face	Boolean type	Clear	Set — the event generation is enabled Clear — the event generation is disabled
3	Mask absence event generation	Set the checkbox	Enables/disables the event generation in case the mask is absent on the face	Boolean type	Clear	Set — the event generation is enabled Clear — the event generation is disabled
4	Mask presence filter	Set the checkbox	Enables/disables the event generation in case the mask state is changed	Boolean type	Clear	Set — the event generation is enabled Clear — the event generation is disabled
No group
5	Indicate similar faces	Set the checkbox	Enables/disables the grouping of similar faces	Boolean type	Clear	Set — the grouping of similar faces is enabled Clear — the grouping of similar faces is disabled
The Alarm temperature group
6	Threshold	Enter the value into the field	Sets the temperature in degrees Celsius. When this value is exceeded, the TEMPERATURE_ALARM event is generated.	°C	37	<>= 0
The Detectors group
7	Lifeless faces Liveness detection sensitivity	Enter the value into the field	Sets the sensitivity of artificial faces recognition in percent	%	50	0-100	8	Do not recognize lifeless faces	Set the checkbox	Enables/disables the recognition of the artificial faces	Boolean type	Clear	Set — recognition of the artificial faces is disabled Clear — recognition of the artificial faces is enabled

The Advanced settings tab:

...

Page tree

Versions Compared

Old Version 5

New Version 6

Key