Go to documentation repository
Page History
The PTZ device object is designed used to register and configure the PTZ device in the Intellect™ system Intellect.
The settings panel of the the PTZ PTZ device object is shown in the figure.
The Main tab.
The Calibration tab.
Table describes the parameters of the settings corresponding to the elements of the settings panel of the PTZ device object.
№ | Parameter | Method for setting the parameter value | Parameter description | Symbols used | Default value | Value range |
1 | Identification number* | Automatically | Display Displays the identification number of the PTZ device object in the digital distributed video surveillance system with the distributed architecture | Sequence of numbers | - | Depends on the number of the PTZ device objects in the digital distributed video surveillance system with the distributed architecture |
2 | Name* | Enter the value in into the field | Set Sets the name of the PTZ device object in the digital distributed video surveillance system with the distributed architecture | Latin, Cyrillic letters characters and service characters | PTZ device | A line containing a sequence of any symbols characters (letters, digits, service characters apart from except > and < symbolscharacters), not case-sensitiveinsensitive. Number of characters – — from 1 to 60. |
3 | Disable | Is set with Set the checkbox | Set Sets the status state of the PTZ device object (enabled or disabled) in the digital distributed video surveillance system with the distributed architecture | Boolean type | NoClear | Yes – Set — the PTZ device object is disabled and is not in useisn't used Clear — No – the PTZ device object is enabled and is in use.used |
4 | Telemetry controllerController | Select the value Is selected from the list | Set Sets the Telemetry Controller parent Telemetry controller object of the digital distributed video surveillance systemsystem with the distributed architecture, to which the given PTZ device object refers.belongs | Name of the PTZ device objects registered in the system | Name of the Telemetry Controller parent Telemetry controller object. | Depends on the number of Telemetry the telemetry controllers in the digital distributed video surveillance systemsystem with the distributed architecture |
The Camera group | ||||||
5 | Number | Is selected Select the value from the list | Set the identification number of the surveillance video camera, where the PTZ device is installed. | Sequence of numbers | Not defined | Depends on the number of surveillance video cameras in the digital distributed video surveillance system with the distributed architecture |
6 | Camera | Is selected Select the value from the list | Match Matches the PTZ device with the surveillance video camera, where it is installed. The parameter is used by the Video Monitor surveillance monitor and telemetry window for the purposes Telemetry panel to control the PTZ device.devices of the video cameras | Name of the Camera objects registered in the system | No | Depends on the number of the Camera objects in the digital distributed video surveillance system with the distributed architecture |
7 | Presets | Is set with Set the checkbox | Select Selects the presets that are to should be displayed in the Telemetry control boxpanel | Boolean type | NoClear | Up to 355 presets can be enabled. The maximum number depends on the device, see Appendix 6. Maximum number of presets for IP devices. Yes – Set — the preset name is displayed in the Telemetry control boxpanelNo – Clear — the preset name is not isn't displayed in the Telemetry control boxpanel |
Name | Enter the value in into the field | Set Sets the preset name to display it in on the Telemetry control boxpanel | Latin, Cyrillic letters characters and service characters | Preset | A line containing a sequence of any symbols characters (letters, digits, service characters), not case-sensitiveinsensitive | |
8 | Select/Deselect | Is set with Set the checkbox | Check/Uncheck Sets/clears the checkboxes next to all the elements in the Presets table | Boolean type | NoClear | Yes – Set — select all the presetsNo – uncheck all the Clear — deselect all presets |
| Zooming The PTZ speed group | ||||||
| 9 | Min | Enter the value in into the field | Sets the minimal practical minimum possible speed of optical zoom on the PTZ device | Speed in standard units | 0 | 1 – 10 |
| 10 | Max | Enter the value in into the field | Sets the maximal practical maximum possible speed of optical zoom on the PTZ device | Speed in standard units | 0 | 1 – 10 |
| The Mouse group | ||||||
| 11 | Min | Enter the value in into the field | Sets the minimal practical minimum possible rotation speed of the PTZ devices from the Monitor Video surveillance monitor | Speed in standard units | 0 | 1 – 10 |
| 12 | Max | Enter the value in into the field | Sets the maximal practical maximum possible rotation speed of the PTZ devices from the Monitor Video surveillance monitor | Speed in standard units | 0 | 1 – 10 |
| The Joystick group | ||||||
| 13 | Min | Enter the value in into the field | Sets the minimal practical minimum possible rotation speed of the PTZ devices using the joystick | Speed in standard units | 0 | 1 – 10 |
| 14 | Max | Enter the value in into the field | Sets the maximal practical maximum possible rotation speed of the PTZ devices using the joystick | Speed in standard units | 0 | 1 – 10 |
| The Point&Click group | ||||||
| 15 | Min | Enter the value in into the field | Sets minimal practical minimum possible rotation speed of the PTZ device in the direction of the mouse click (Point&Click) | Speed in standard units | 0 | 1 – 10 |
| 16 | Max | Enter the value in into the field | Sets maximal practical maximum possible rotation speed of the PTZ device in the direction of the mouse click (Point&Click) | Speed in standard units | 0 | 1 – 10 |
| Outside Not in the groups | ||||||
| 17 | RS-232 Device address | Enter the value in into the field | Sets the address of the PTZ device configured installed via hardware (with jumpers on the PTZ device board) or software (through a with a special software for the PTZ devices firmware upgrade ). | Sequence of numbersNon-negative integer | 1 | Integer from 1 to 255. Depends on the PTZ device protocol. |
| 18 | Force disabling continuous PTZ mode | Set the checkbox | Sets the PTZ control mode: continuous or discrete. | Boolean type | 0 | 0 – the continuous PTZ control mode is enabled. 1 – the discrete PTZ control mode is enabled . |
| The Calibration tab | ||||||
| 19 | update | Click the button | Get Gets data on the current camera position and display them in the pan, tilt, zoom fields | - | - | - |
| 20 | pan | Automatically on clicking the update button | Panoraming of the PTZ device "pan" position | Integer | - | Depends on the model of the connected PTZ device |
| 21 | tilt | Automatically on clicking the update button | Tilt of the PTZ device "tilt" position | Integer | - | Depends on the model of the connected PTZ device |
| 22 | zoom | Automatically on clicking the update button | Scaling (zooming) of the PTZ device zoom value | Sequence of numbersNon-negative integer | - | Depends on the model of the connected PTZ device |
| 23 | x | Enter the value in into the field | The X coordinate of the point on the map corresponding to the selected position of the camera. | - | Depends on the Map map size | |
| 24 | y | Enter the value in into the field | The Y coordinate of the point on the map corresponding to the selected position of the camera. | - | Depends on the Map sizemap size | |
*Name of the element is not displayed in the settings panel of the given object.
Overview
Content Tools