Page History

...

1. Create the Control device object under the Computer object on the Hardware tab of the System settings dialog window (1).
   
2. Select Hikvision-joystick from the Vendor dropdown Vendor drop-down list  (2).
3. Select DS-1200KI from the Model drop-down list (3).
4. Select V1.2.2 build20051 from the Firmware drop-down list (4).
5. In the Address field, enter the IP address of the control device (5).
6. In the Port field, enter the port of the control device (6).
7. In the User field, enter the username to access the device (7).
   
8. In the Password field, enter the password to access the device (8).
9. Click the Apply button (9).

...

• when entering a number in the range 1-99 and pressing MULT for each number, Intellect receives a message about pressing the corresponding separate key with a number in the range 23-121 (B22-B120);
  
• when pressing PresetRec for the first time, Intellect receives a message about pressing key 13 (B12), and the device displays Record started;
  
• after pressing PresetRec for the second time, Intellect receives a message about pressing key 12 (B11), and Record ended appears on the device display;
  
• when entering a number in the range 1-65535 and pressing PresetRec, Intellect receives a message about pressing key 22 (B21), and the device displays PRESET:;
  
• when entering a number in the range 1-65535 and pressing Patrol, Intellect receives a message about pressing key 17 (B16), and the device displays PATROL:;
  
• when entering a number in the range 1-65535 and pressing PatternPlay, Intellect receives a message about pressing key 18 (B17), and the device displays PATTERN:;
  
• when entering a number in the range 65536-999999 and press any of the PresetRec / Patrol / PatternPlay buttons, nothing happens: such numbers are not processed.

JScript example

The link contains a file with a script in the JScript language, which allows you to assign actions to the keys of the Hikvision DS-1200KI telemetry control panel as follows: