Page History

Use of Axxon Next through a web client takes place remotely, through You can work with Axxon Next via the Web-Client remotely using a web browser and the TCP/IP protocolcommunication environment. Remote video surveillance via a web browser does not doesn't require installation of Axxon Next.

To start the web clientTo start the Web-Client, do the following:

1. Start a web browser.

2. In the address bar, type enter the address of the Axxon Next server Web-Server in the following format: <web server <Web-Server IP address>:<Port>/<Prefix>.

   Tip
   Connecting the web Web and mobile Mobile Clients to the Server behind NAT

   
   

   Note
   title Attention!
   The Server URL is case-sensitive. You have to type in It is necessary to enter the URL using exactly in the exact letter case of characters specified in the settings (see Configuring the Web-Server).

   

   Note
   title Attention!
   If the web server is properly configured A connection via the secure HTTPS protocol will be automatically established, if the Web-Server is configured accordingly (see Configuring the Web-Server), then a secure HTPPS connection is automatically established.

   
   

3. Enter a user name login and password for connecting to connect to the Axxon Next web server Web-Server.
   
   
   

   Info
   title Note
   If you try to log in with an invalid login and password, an error message will be displayed. Image Added

   
   

   Note
   title Attention!
   After 5 successive failed authorization log in attempts, the user is blocked for 10 minutes.

...

1. As a result, the Web-Client interface will be displayed. By default, the first listed layout will be displayed. If there are no layouts, the Cameras panel

...

1. will open on the left and

...

1. the video image from the first listed video camera will be displayed.

Image RemovedImage Added

To switch between users, press the Change User link in the upper-right corner; another authentication will followchange the user in the Web-Client, click the Image Added button in the top right corner and select the Change user menu item.

Image RemovedImage Added