Page History

The POS process system object is created under the Computer object in the Hardware tab of the System setting dialog box.  

 Image Modified

To configure the POS process system object, do the following:

1. Go to the settings panel of the POS process object.
   Image Modified
2. POS terminal objects created in the object tree are listed in the Available POS terminals list (1).

3. Move required terminals to the Selected POS terminals (2) using and buttons (2). Information from selected terminals will be in use to count cases of appearing the specified parameter.

   Info
   title Note
   To back POS terminals from the Selected POS terminals list to the Available POS terminals list use and  and  buttons.

   
   

4. In the Parameter name field enter the name of parameter at which the number of equal values is to be controlled (3). Parameter name is depends on protocol characteristics on which the terminal works.
5. In the Maximal number field enter the maximal number of appearance of equal parameter values (4).

6. In the Additional information enter the events description which will be included to the event description next to the card number and number of repeats (5).
    

   Info
   title Note
   In example displayed in the figure, the description of alarm messages will be presented as «Some information 3x123», where 123 is a card number, 3 is a number of times when the parameter appeared.

   
   

7. From the Clear counter by time zone activation drop-down list select the Time zoneschedule object corresponding to the time period start of which shows the necessity to reset the counter of parameter appearances (6).
    

   Info
   title Note
   The Time zoneschedule objects are created and configured on the Programming tab of System setting dialog box. Detail information about creating and configuring the time zone is presented in the Axxon PSIM software package. Administrator’s Guide document.

   
   

8. Click the Apply button (7).

...