Page History

...

1. Set the control device address: Select System - → Network in the device internal menu, then interface. Then disable DHCP and set the IP address and the gateway.
   

2. Set the Intellectserver IP address and Server port on the device: Open . To do this, open the device web interface by entering the above set IP address in the web browser, then select Platform Access - → Third-Party Platform.

   Info
   title Note.
   The web interface is only available on https by default, so please use enter the https prefix before the IP address.

   

3. Set the 8. Private VMS mode in the device 's internal interface.
   
4. Transfer To put the PTZ control device to into operating mode by , do one of the following actions:
   1. Select any monitor MON (monitor) [integer in the range 1-9999], any camera CAM (camera) [integer in the range 0-999999]; in this mode all keys will work, including the WIN (subwindow of video wall) and MULT (layout size) keys for the monitor and camera.
   2. Select any camera CAM (camera) [integer number in the range 1-999999 (number 0 is available only when setting the monitor)]; the WIN, MULT and CAM-G keys will not work in this mode.

   3. Select any monitor MON (monitor) [integer in the range 1-9999] and any group of cameras CAM-G (camera group) [integer in the range 1-999999]; in this mode, only the MULT, OK keys and the rotations of the joystick axes will work.
      
      

      Info
      title Note.
      To select these parameters, enter a number on the device keypad, then press the corresponding key (MON/WIN/CAM/CAM-G). If the the server the Server IP address and/or port is not accessible from the PTZ control device,  the the "Connect failed" message will be displayed on the control device screen after pressing the MON/WIN/CAM/CAM-G keys.

      
      

...

Configuring the Hikvision DS-1200KI control device in Intellect

To configure the connection of the Hikvision the Hikvision DS-1200KI control device to the Intellect software package, proceed as follows, do the following:

1. Create the Control device object under on the basis of the Computer object on the Hardware tab of the System settings dialog window (1).
   Image Modified
2. Select Hikvision-joystick from From the Vendor drop-down list  , select Hikvision-joystick (2).
3. Select DS-1200KI from From the Model drop-down list, select DS-1200KI (3).
4. Select From the Firmware drop-down list, select V1.2.2 build20051 from the Firmware drop-down list (4).
5. In the Address field, enter the IP address of the control device (5).
6. In the Port field, enter the port of the control device (6).
7. In the User field, enter the username to access the device (7).
   
8. In the Password field, enter the password to access the device (8).
9. Click the Apply button (9).

Configuring the connection of the Hikvision the Hikvision DS-1200KI control panel to the Intellect software package is  is now complete.

Features of the Hikvision DS-1200KI control device operation in Intellect

When the MULT, PRESET, PATROL, or PATTERN keys are pressed on the device, the following actions are performed:

• when entering you enter a number in the range 1-99 and pressing press MULT for each number, Intellect receives a message about pressing the corresponding separate key with a number in the range 23-121 (B22-B120);
  
• when pressing you press PresetRec for the first time, Intellect receives a message about pressing the key 13 (B12), and the device displays Record started;
  
• after pressing when you press PresetRec for the second time, Intellect receives a message about pressing the key 12 (B11), and the device displays Record ended appears on the device display;
  
• when entering you enter a number in the range 1-65535 and pressing press PresetRec, Intellect receives a message about pressing the key 22 (B21), and the device displays PRESET:;
  
• when entering you enter a number in the range 1-65535 and pressing press Patrol, Intellect receives a message about pressing the key 17 (B16), and the device displays PATROL:;
  
• when entering you enter a number in the range 1-65535 and pressing press PatternPlay, Intellect receives a message about pressing the key 18 (B17), and the device displays PATTERN:;
  
• when entering you enter a number in the range 65536-999999 and press any of the PresetRec / Patrol / PatternPlay buttons, nothing happens: such numbers are not processed.

JScript example

The link contains a file with a script in the JScript language, which allows you to assign actions to the keys of the Hikvision DS-1200KI telemetry control panel as follows: