Go to documentation repository
Page History
...
Core | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32) | ChangePort | > = 0 | Depends on the port specified for the Client. | 4.7.3 and later | Allows changing the port number. For instance, if it is necessary to change port 20900 to 40900, then 20900="40900" string parameter is created. |
x32: (x32) | CheckPingPeriod | > 0 | 10 | 4.7.4 to 4.10.2 | Sets Server-computer ping period. Note. In Intellect since version 4.10.3 this parameter is set on the settings panel of the Security zone object |
x32: (x32) | CheckVersion | 0, 1 | 0 | 4.7.4 and later | Sets the parameters of Server connection: the version is checked in connected version parameters. If versions do not agree, then there is a corresponding message and no connection |
x32: (x32) | Core IP Address | IP address | - | 4.7.3 and later | Address of the computer to the core of which the slave.exe is to connect |
x32: (x32) | DBAttempts | >=1 | 10 | 4.7.3 and later | Number of attempts to connect to database |
x32: (x32)/Debug | DebugLevel | 0,1,2,3,4 | 0 | 4.7.3 and later | Sets the debug mode: 1 – information is shown in the process window 2 – information is shown in the process window and logged 3 – extended log is written – it contains module events 4 – extended log is written – it contains module events and parameters |
x32: (x32)/Debug | DebugExtension | Any string | LOG | 4.7.3 and later | Sets extensions of log files |
x32: (x32)/Debug | DebugFlushPeriod | > = 0 | 500 | 4.7.4 and later | Sets the update rate for log files (ms) |
x32: (x32)/Debug | DebugOptions | Range in decimalsystem: 0-255. | 0x001 (i.e. 1) | 4.7.3 and later | Hexadecimal logging in the debug mode. This parameter has a complex structure (bit mask) and it is modified using the Tweaki.exe utility |
x32: (x32)/Debug | DebugQueueMaxLines | 0 – 2147483647 | 2000 | 4.7.4 and later | Specifies max. number of messages in a queue to log file. If there are more than 500 log lines in the queue, then they are to be groomed |
x32: (x32)/Debug | DebugSize | >=100 | 100 | 4.7.3 and later | Specifies the number of megabytes provided for log. Restricted by disk capacity |
x32: (x32)/Debug | DebugTime | 0-2147483647 | 48 | 4.7.3 and later | Specifies the number of hours for keeping log files |
| x32: (x32)/Debug x64: (x64)/Debug | DebugZipDays | >0 | 2 | 4.7.5 and later | Specifies the number of days for keeping log files in the gz format |
| х32: (x32) x64: (x64) | debug_log | 0, 1 | - | 4.11.2 and later | By default, the key is not created. The key defines whether all events and reactions all fully logged into the log file. Note. It is not recommended to use this key on a permanent basis, because with full logging, the size of the log file will constantly increase |
| х32: (x32) x64: (x64) | debug_protocol | 0, 1 | 0 | 4.11.2 and later | The key creates the DEBUG_PROTOCOL table in the database. All events and reactions are recorded in the table. Note. When restarting Intellect, the table will be created anew |
x32: (x32) | defaultconnection | 0, 1 | 1 | 4.7.4 and later | Allows setting connections in the architecture only with the computer where the Computer object is created |
x32: (x32) | DisableProtocol | 0, 1 | 0 | 4.7.3 and later | Allows disabling protocol |
x32: (x32) | DisableThreadStatQueue | 0, 1 | 0 | 4.8.0 and later | By default the key is not created. Defines whether the queue statistics is called or not. If the registry key value=1, then the box can not be called. To call the Queue statistics box, follow the steps:
|
x32: (x32) | InstallFolder | Intellect | 4.7.3 and later | Specifies the installation folder | |
x32: (x32) | Language | 0x0419 | - | 4.7.3 and later | Specifies the language to use (0x0419 – English) |
x32: (x32) | LogIncommingMsg | 0, 1 | not created | up to 4.8.0 | Defines whether logging of incoming events is enabled or not |
x32: (x32) | LogOutgoingMsg | 0, 1 | not created | up to 4.8.0 | Defines whetheroutgoing reactions (for example, commands) will be logged or not |
x32: (x32) | LogStatistics | 0, 1 | not created | up to 4.8.0 | Defines whether the statistics is logged or not |
x32: (x32) | OnlyLocalProtocol | 0, 1 | 0 | 4.7.3 and later | Only local events are logged |
| х32: (x32) x64: (x64) | ProtocolWriteAllEvents | 0, 1 | 0 | 4.11.2 and later | Defines whether the events are recorded into the Events protocol |
x32: (x32) | PeakWorkingSetSizeQuota | >=0 | 0 | 4.8.1 and later | Sets RAM limit (MB). When this limit is exceeded, the module that exceeded this limit will be restarted in the restart service |
x32: (x32) | PhotoCores | Name or IP address | - | 4.7.3 and later | The list of computers (cores) for mailing user photos |
x32: (x32) | PriorityClass | 256, 128, 32768, 32, 16384, 64 | 16384 | 4.7.3 and later | Defines the stream priority: 256 – realtime 128 – high 32768 – Above Normal 32 – normal 16384 – below Normal 64 – low |
x32: (x32) | ShowCrashMessage | 0, 1 | 0 | 4.7.5 and later | Create or not the module crash message |
x32: (x32) | SyncTime | 0, 1 | 0 | 4.7.3 and later | Defines whether to synchronize time between computers or not |
x32: (x32) | Topmost | 0, 1 | 1 | 4.7.4 and later | Sets the splash screen location: This key is applied for splash screen on the Server/Remote Administrator’s workstation for Intellect versions older than 4.10.0, for versions newer 4.10.1 – both on the Server/Remote Administrator’s workstation and on the Client |
x32: (x32) | Type_view_dept_log | 0,1,2 | 0 | 4.7.4 and later | Specifies displaying the name of department in the log: 0 – do not add: Ivanov Ivan Ivanovich |
x32: (x32) | URAttempts | 0 – 10000 | 3 | 4.7.3 and later | Sets the number of attempts to enter the user password |
x32: (x32) | URDelay | 0 – 10000 | 60 | 4.7.3 and later | Sets the delay period (sec) for re-entering the system |
x32: (x32) | virtualgrabber | 0, 1 | 0 | 4.7.6 and later | Defines whether it is possible to create a virtual video capture card or no |
x32: (x32) | SyncNotEmpty | 0, 1 | 0 | 4.8.5 and later | Defines the database synchronization algorithm: 1 – fast synchronization algorithm is in use 0 – standard synchronization algorithm is in use |
x32: (x32)\Debug | counter_period | >=0 | 0 | 4.9.0 and later | Defines the time period in seconds, in which information about availability of processor, memory and disk is recorded to the log-file. If the value of parameter is 0, this information is not included to the log-file |
x32: (x32)\ IntellectRunService | RestartIntellectOnLogonDisable | 0, 1 | 0 | 4.9.0 and later | 1 – Intellect installed as a Service is not restarted under the current user even for users belonging to the IntellectUsers group 0 – Intellect installed as a Service is restarted under the current user only if the user belongs to the IntellectUsers group |
x32: (x32)\ IntellectRunService | CheckUserForRestartIntellectDisable | 0, 1 | - | 4.9.0 and later | 0 – Intellect installed as a Service is restarted (when entering the system) under the current user only if the user belongs to the IntellectUsers group 1 – Intellect installed as a Service is restarted (when entering the system) under the current user even if the user doesn’t belong to the IntellectUsers group. The settings of permissions are to be taken into account when using this key. If the permissions are set incorrectly, then some Intellect features can operate incorrectly |
x32: (x32) | ShowHiddenObjects | 0, 1 | 0 | 4.9.0 and later | 0 – hidden objects corresponding to IntegratedAudioSource and IntegratedVideoSource objects, as well as to Integrated device child objects are not shown in the object tree in Intellect 1 – hidden objects are shown in the object tree in Intellect Intellect is to be restarted when the key value is changed |
x32: (x32)\ IntellectRunService\ | InheritServiceEnvironment | 0, 1 | - | 4.9.0 and later | The key is essential for proper operation of Intellect in MS failover cluster |
x32: (x32) | SortCamsById | 0, 1 | - | 4.8.8 and later | The key is responsible for sorting the list of cameras on the settings panelof the Monitor object. 1 – cameras are sorted by ID 0 – cameras are sorted by names |
x32: (x32) | EventProcessingThreads | >=0 | 0 | 4.9.0 | Key reserves the specified number of streams for events processing |
| 4-8 | Equal to CPU cores number | 4.11.3 and later | |||
x32: (x32)\Debug | DumpYUV | 0, 1 | - | 4.9.0.959 and later | Key activates the mode of video dump corresponding to compressor. It is required for diagnostics of StreamLabs (motionWavelet7.1) compressor/decompressor problems. File (or files) with decompressed data will be created by key in the Modules directory. Names of files correspond to the template: W – width For example, file with resolution 640x480 in YUV420 color area will have the 640x480_22_chunk_0.yuv name |
x32: (x32) | settings_height | >0, depends on screen resolution | 438 | 4.11.3 and later | Sets the height of the object settings panel (in pixels) |
x32: (x32) | settings_width | >0, depends on screen resolution | 600 | 4.11.3 and later | Sets the width of the object settings panel (in pixels) |
| x32: (x32) x64: (x64) | ATMSendSetup | 0, 1 | 1 | 4.9.3 and later | 0 – receiving of the SETUP reaction from the ATM object is disabled on the computer where this key is specified 1 – receiving of the SETUP reaction from the ATM object is enabled on the computer where this key is specified |
| x32: (x32) x64: (x64) | RegisterF10andF11 | 0, 1 | 1 | 4.9.2 and later | 1 – F10 and F11 hot keys are in use to control screen displaying (see Main control panel) 0 – F10 and F11 hot keys are not in use to control screen displaying Note.When the key is changed Intellect restart is required. To disable F10 and F11 hot keys on the Remote Administrator's workstation, the key is to be created in the \HKEY_CURRENT_USER\Software\ITV\Intellect registry section. To disable F10 and F11 hot keys on the Remote Administrator's workstation when operating under the Admin account, he key is to be created in the same registry section as on Server (x32)/(x64) |
| x32: (x32) x64: (x64) | DisableF8 | 0, 1 | 0 | 4.10.4 and later | 0 – F8 hot key is in use to call the Execute menu on the main control panel 1 – F8 hot key is not in use Note. To disable F8 hot key on the Remote Administrator's workstation, the key is to be created in the \HKEY_CURRENT_USER\Software\ITV\Intellect registry section. To disable F8 hot key on the Remote Administrator's workstation when operating under the Admin account, he key is to be created in the same registry section as on Server (x32)/(x64) |
x32: (x32) | check_digital | 0, 1 | 0 | 4.8.0 and later | When the key value = 1, video or archive period is exported from the Monitor interface using the admin password |
| x32: (x32) x64: (x64) | CONNECT_ATTEMPTS | >=1 | 1 | 4.9.4 and later | The key sets the number of attempts to connect the Client to Server. The key is specified on the side of the Client |
| x32: (x32) x64: (x64) | FLUSH_TIMER_TIMEOUT | >0 | By default the key is not created, the value is 10. | 4.9.4 and later | The key specifies maximum waiting time (in milliseconds) before sending data over the network. The higher the value of this parameter, the more productive the system is (due to decreasing resources when sending a large amount of small messages). However, time of response to events can also increase |
| x32: (x32) x64: (x64) | UnloadDelay | 0 to 60000 ms | 5000 | 4.9.5 and later | The key sets the delay between disabling Guardant and unloading Intellect. The delay is essential for the FORCED_OFF event generation of the SLAVE object and in case this event is used in scripts or programs, these scripts and programs are executed. If UnloadDelay = 0, unloading is performed without any delays, i.e. script/program in which the specified event is used, cannot execute |
| x32: (x32) x64: (x64) | SortSubItems | 0, 1 | 0 | 4.9.5 and later | The key is for specifying the way of sorting objects in the tree: 0 – sorting by name 1 – sorting by ID Note 1. If sorting by name is chosen, and there are numbers in the object name, then the objects will be sorted in alphabetical order. For example, an object with the name "115" will be above the object with the name "15", because in the name "115" the second number is 1, and in the name "15" the second number is 5. Note 2. This key also affects the sorting of objects in the tree when adding the objects to a layer in the Map Editor utility |
| x32: (x32) x64: (x64) | ShowSmallBarAlways | 0, 1 | 0 | 4.10.1 and later | The key enables displaying the main control panel of Intellect on the screen. 0 – the main control panel is displayed when pointing to the upper right corner of the screen 1 – the main control panel is always displayed in the upper right corner of the screen |
| x32: (x32) x64: (x64) | UpdateProtocolPeriod | > 0 | - | 4.10.2 and later | Sets time period (in days) of storing the change protocol in the database. The storing period is counted from the last recording or starting from the current time depending on the value of the ClearProtocolFromCurrentTime key (see above). Recordings storing period of which has expired are deleted at midnight every 24 hours in case the license is activated |
| x32: (x32) x64: (x64) | permissible_memory_limit | >0 | - | 4.10.3 and later | The key sets the occupied memory threshold, reaching which the core starts receiving messages with a delay. The key should be used when due to excessive memory consumption, the module shuts down |
| x32: (x32) x64: (x64) | MsgCompressOn | 0, 1 | 0 | 4.10.3 and later | The key enables the compression of transmitted messages: 0 — compression is disabled 1 — messages from the cores are sent compressed (zip with maximum compression). Compression allows reducing the network load Note. If the key value = 1, the Web-Server doesn't work, because the Web-Server doesn't recieve compressed messages |
| x32: (x32) x64: (x64) | user_card_info_on | 0, 1 | 0 | Intermediate versions 4.10.3 | The key is used with the ACS/FAS integration modules that are the part of ACFA Intellect. It enables displaying the access card number for all events associated with the cards in the Event Viewer. Note. In the released version 4.10.3 to show and hide the Card column use the Hide Card checkbox – see Event viewer parameters |
| x32: (x32) x64: (x64) | CriticalErrGui | 0, 1 | 0 | 4.10.3 and later | It enables displaying messages about database connection errors regardless the debugging mode (see the description of the Debug key and Selecting and enabling the debug mode of Intellect software section). 0 – messages about database connection errors are displayed only at Debug 4 debugging levels 1 – messages about database connection errors are displayed regardless the selected debugging level |
| x32: (x32) x64: (x64) | IntellectCloseTimeout | >0 | 60000 | 4.8.3 and later | It sets Intellect close timeout in milliseconds. If intellect.exe process does not close during this timeout, then it is terminated forcefully. If there is no key, then timeout is 60 seconds |
| x32: (x32) x64: (x64) | SaveIncommingMsg | 0, 1 | 0 | 4.7.8 and later | It enables recording of incoming messages to log files for started modules. The file name looks like <module name>.exe.cd.log. These files are stored in the same folder as the executed module file, for instance, for intellect.exe the intellect.exe.cd.log file is stored in the Intellect installation directory and for VMSScript.exe the VMSScript.exe.cd.log file is stored in the Modules folder. When the size of the log file exceeds 4 GB, it is archived to the backup file with .bak extension – <module name>.exe.cd.log.bak. This is necessary to avoid module overload. Note. The log file is rewritten when Intellect is restarted. 0 – recording of incoming messages is disabled 1 – recording of incoming messages is enabled |
| x32: (x32) x64: (x64) | BackupFolder | Address of a local or network folder | - | 4.7.6 and later | Specifies the address of the folder to save a backup copy of the database created by a macro or using the idb.exe utility. For example, C:\Documents and Settings\AVP\Desktop\Backup If the database copy is to be stored on the network disk, then the UNC path to the network folder (with the recording access) is to be specified on the disk in the \\ServerName\ShareName format. Take into account the fact that all network resources that require additional authentication are to be enabled using the same username as for running the SQL Server service. See also Creating the database backup copy |
x32 and x64: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon | Shell | Any text value | explorer.exe | 4.10.5 and later | If the key value contains the "explorer" string (for example, the default value, "testexplorertest" or "123explorertest125" values), the Save button is displayed in the About program... window. Otherwise, the Save button is hidden |
| x32: (x32)\ IntellectRunService x64: (x64)\ IntellectRunService | IntellectUserGroup | Any text value | from 4.10.0 | If Intellect is installed as a Service, and you need to use a user group other than IntellectUsers, then specify the required user group name in this key | |
| x32: (x32) x64: (x64) | monitor_refresh_delay | 10 -30000 | 3000 | from 4.10.5 | The key sets a period in milliseconds to update video on Video Surveillance Monitors of the Clients after Failover Service has transferred configuration. If the key value is less than 500, the monitors are updated regardless of the number of cameras. If the key value is more than 500 and the number of cameras on the monitor is more than 64, the update does not occur while the System Settings dialog box is open |
| x32: (x32) x64: (x64) | DisableUpdateProtocol | 0, 1 | 0 | from 4.7.5 | The key disables the filling of the UPDATE_PROTOCOL table storing information about changes of Intellect object settings (except the User objects). 0 – the UPDATE_PROTOCOL table is filled 1 – the UPDATE_PROTOCOL table is not filled |
| x32: (x32) x64: (x64) | max_disp_menu_items | >0 | 50 | from 4.10.5 | If the number of screens assigned to a computer is larger than that specified in the key, scrolling the list of screens with the mouse wheel becomes available (if the size of the list is larger than the size of a computer monitor). The key is set on each Server and Client where this function is required |
| x32: (x32) x64: (x64) | URM_ProcessWait | >0 | 10000 | from 4.10.5 | The key sets time period in milliseconds to wait for the Client to stop before aborting the Video.run process. The key should be created on the Clients |
| x32: (x32) x64: (x64) | show_responsible | 0, 1 | 0 | from 4.10.5 | The key enables the display of users responsible for the region (if assigned) in events from objects related to the regions:
The key is created on the Server |
| x32: (x32) x64: (x64) | NotifyExpireLic | 0, 1 | 0 | from 4.10.5 | The key enables the event showing the days left to the license expiration (see SLAVE) |
| x32: (x32) x64: (x64) | sync_timeout | >0 | 600 | from 4.10.5 | The key sets the time period in seconds allocated for synchronizing the database when starting Intellect software. The key must be created on the Server, where synchronization with another server occurs. See also Database synchronization setup |
| x32: (x32) x64: (x64) | ShowPanelByKey | 0, 1 | 0 | from 4.10.11 | The key disables the display of the Main control panel by hovering the mouse cursor in the upper right corner of the screen. Having the key is set to 1, use the F12 hotkey to call the Main control panel |
| x32: (x32) x64: (x64) | IntegrityCheck | 0, 1 | 0 | from 4.11.0 | Enables distribution integrity check when starting Intellect software package. The following files are checked:
If any of them is missing or changed, the message "The integrity of the distribution package is broken. Reinstall Intellect" is displayed in the launch window, and the Intellect start interrupts |
| x32: (x32)\Display x64: (x64)\Display | DISPLAY_MAX_NUM | 1-1000 | 500 | from 4.10.5 | The key sets the maximum number of Display objects that can be assigned to one computer |
| x32: (x32)\ x64: (x64)\ | RestPort | 0 – 65535 | 10112 | from 4.10.1 to 4.10.2 | Sets the port through which Intellect receives events and reactions via HTTP request. See also Sending reactions and events to Intellect using HTTP request. The key is discontinued starting from Intellect 4.11.1. The port is set on the Web server object settings panel – see Setting the parameters of connecting Clients to the Web-server |
| 0 | from 4.10.3 to 4.11.0 | ||||
| x32: (x32)\ x64: (x64)\ | ADSyncOnStart | 0, 1 | 0 | from 4.10.5 | The key enables synchronization with Active Directory when starting Intellect software. 0 – synchronization with AD when starting Intellect is disabled 1 – synchronization with AD when starting Intellect software is enabled |
| x32: (x32)\ x64: (x64)\ | NgpMode | 0, 1 | 0 | from 4.11.1 | The key enables the joint operation of the Intellect software package and the Axxon Next software package. 0 – joint operation is disabled 1 – joint operation is enabled |
| x32: (x32)\ x64: (x64)\ | cur_monitor | >0 | not set | from 4.11.2 | The key specifies the number of the physical monitor on which the Main Control Panel should be displayed. The key can be used both for the Intellect Server/RAW configuration, and for the Client configuration. Monitors are numbered left to right, top to bottom, regardless of system numbering. Important! The numbering of monitors starts from 0. For example, set the key to 0 to display the Main Control Panel on the 1st physical monitor; set to 1 to display on the 2nd monitor, etc. By default, the Main Control Panel is displayed on the Primary monitor selected in the system screen options |
| x32: (x32)\Macro x64: (x64)\Macro | UseHotKeys | 0, 1 | 1 | from 4.11.3 | The key disables hot keys for macros. 0 – hotkeys in macros are disabled 1 – hotkeys in macros are enabled |
| х32: (x32) x64: (x64) | SocketReadSize | >0 | 32768 | from 4.8.3 | The key sets the size of the buffer to receive the TCP transport layer in bytes. Examples of values: 262144 (0.25 MB), 1048576 (1 MB), 10485760 (10 MB). Used together with the SocketWriteSize parameter |
| х32: (x32) x64: (x64) | SocketWriteSize | >0 | 32768 | from 4.8.3 | The key sets the buffer size to send the socket of the TCP transport layer in bytes. Examples of values: 262144 (0.25 MB), 1048576 (1 MB), 10485760 (10 MB). Used together with the SocketReadSize parameter |
| х32: (x32)\InstallPropertyInfo x64: (x64)\InstallPropertyInfo | INSTALL_AS_SERVICE | 0, 1 | 0 | from 4.11.3 | Enables Intellect installation as a Service. 0—standard Intellect installation 1—Intellect will be installed as a Service |
| х32: (x32) x64: (x64) | core_module_name | intellect.exe, intellect64.exe | intellect.exe | from 4.11.3.4160 | Sets the executable file of the program module if Intellect is installed as a Service. intellect.exe—the intellect.exe program module is started when Intellect Core Server service is started intellect64.exe—the intellect64.exe program module is started when Intellect Core Server service is started |
Telemetry | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\TELEMETRY | Delay | > = 0 | 250 | 4.7.3 and later | Defines the delay (ms) when sending commands to the camera. This key is essential for grooming the stream of commands to the device as some devices can be blocked because of too many commands and cannot process the information. This parameter is not supported by IP cameras |
x32: (X32)\TELEMETRY | JoysticThreshold | > = 0 | 5 | 4.7.6 HOTFIX and later | This parameter sets the joystick trigger threshold: the less the number is, the more sensitive joystick is. 0 value is not recommended to be used, as commands can be sent randomly. When the value is too big, the joystick becomes rotation-insensitive |
x32: (X32)\TELEMETRY | PriorityDelay | > = 0 | 30000 | 4.7.3 and later | Defines the priority delay (ms) |
x32: (X32)\TELEMETRY | UseBoschOSRD40 | 0, 1 | - | 4.8.4 and later | Enables presets saving for Bosch-Autodome control protocol |
x32: (X32)\TELEMETRY | PnPJoystick | 0, 1 | 0 | 4.8.3 and later | The key defines whether to restart Intellect after connecting a joystick: 0 – Intellect is to be restarted after connecting the joystick |
x32: (X32)\TELEMETRY | Zenable | 0, 1 | 1 | 4.7.7 and later | The key is in use with joysticks (e.g., Logitech Attack 3) where the telemetry control operates incorrectly because of shifted Z axis. Z axis is disabled when the parameter value is 0. Z axis is enabled when the parameter value is 1 |
| x32: (X32)\TELEMETRY x64: (x64)\TELEMETRY | ZoomSpeed850 | 0,1 | 1 | 4.9.0 and later | The key is used in order to set the zoom step when panasonic-850 telemetry protocol is in use: 1 – zooming with 50% step of max. possible 0 – zooming with 20% step of max. possible |
| x32: (X32)\TELEMETRY x64: (x64)\TELEMETRY | Zdirection | 0, 1 | 0 | 4.7.6 and later | The key is responsible for coordinate move in the Z-direction |
| x32: (X32)\TELEMETRY x64: (x64)\TELEMETRY | Ydirection | 0, 1 | 0 | 4.7.6 and later | The key is responsible for coordinate move in the Y-direction |
| x32: (X32)\TELEMETRY x64: (x64)\TELEMETRY | Xdirection | 0, 1 | 0 | 4.7.6 and later | The key is responsible for coordinate move in the X-direction |
| x32: (X32)\TELEMETRY x64: (x64)\TELEMETRY | WaitDelay | >=0 | 0 | 4.7.5 and later | If a joystick sends the messages about its state to Intellect too frequently and Intellect has no time to process these messages, then this parameter is in use – it allows calling the signal handler less frequently. For instance, this parameter should be used with Axis 295 joystick. The best parameter value is to be chosen. The value should match the 100 – 300 range |
| x32: (x32)\TELEMETRY x64: (x64)\TELEMETRY | TelemetryDirectCommand | 0, 1 | 1 | 4.9.8 and later | The key specifies way of command transmission to telemetry: 1 – telemetry server is connected to video servers and sends commands to devices 0 – telemetry server sends commands to the Intellect core which send them to devices See also description of the MonitorToTelemetryDirectCommand key below |
| x32: (x32)\TELEMETRY x64: (x64)\TELEMETRY | MonitorToTelemetryDirectCommand | 0, 1 | 0 | 4.9.8 and later | The key specifies way of transmission telemetry commands while control from the Monitor: 1 – telemetry server is connected to video servers and sends commands to devices while telemetry control from the Monitor 0 – telemetry server sends commands to the Intellect core which send them to devices while telemetry control from the Monitor The key is in use with the TelemetryDirectCommand key to provide smoother telemetry control. Recommended values of these keys: TelemetryDirectCommand = 1 (default value) MonitorToTelemetryDirectCommand = 1 (attention: default value is 0) Attention! Client, server and camera should be in one subnet without video gate when using these registry keys. Otherwise, systemwillnotoperate |
| x32: (x32)\TELEMETRY x64: (x64)\TELEMETRY | SendEventToCore | 0, 1 | 0 | 4.10.0 and later | The key is to enable the function of sending events to Intellect core when controlling PTZ. This function is essential for PTZ control audit. 1 – when sending any reaction of TELEMETRY object the corresponding event is generated 0 – during PTZ control events are not generated |
| x32: (X32)\Video\CommonPresets x64: (x64)\Video\CommonPresets | ONVIF | 0, 1 | 0 | 4.10.0 and later | The key enables presets created on the camera in Intellect. The function is only available when camera is connected via ONVIF protocol and only if video server settings are selected when adding a Video capture device using the Camera discovery tool and the Use device settings checkbox is set unchecked on the settings panel of the Video Capture Device object. 0 – presets created on the camera are not used in Intellect 1 – presets created on the camera are in use in Intellect. The features are listed below:
|
| x32: (X32)\TELEMETRY x64: (x64)\TELEMETRY | panas850_stop_dublicates | >0 | - | 4.10.2 and later | The key is in use if the camera rotation is not stopped when telemetry is controlled over Panasonic-850 protocol. The key specifies how many times the stop command is to be duplicated |
| x32: (X32)\TELEMETRY x64: (x64)\TELEMETRY | DisableInternalJoystick | 0, 1 | - | 4.11.0 and later | The key enables the old mechanism for connecting and controlling joysticks using Windows tools. 1 – the joystick is controlled by Driver Pack driver 0 – the joystick is controlled by Windows built-in driver By default, joysticks should be connected the Camera discovery tool as a Control Device.See also Configuring the joystick for telemetry control. DO NOT set the key to 0 if the Control Device object is created for the joystick. DO NOT set the key to 1 if the Control Panel object is created for the joystick |
...
Overview
Content Tools