Go to documentation repository
Page History
The following table contains all the alarm types that are controlled by the monitoring Monitoring PSIM system by default. For Communication channel alarm group: if Agent Of Control connects to Server of Control via the TCP/IP protocol and it has connected to it before, the Device field shows the object's IP address.
Alarm group | Alarm type | Device | Comment |
Communication channel | No connection with the object | Communication channel | Agent Of Control connects to Server of Control in client mode |
No connection with the monitoring Monitoring PSIM agent | Local video system | Agent Of Control connects to Server of Control in server mode | |
Hardware | Disk failure | 101:Disk name | Intellect's settings contain the names of the disks to record video archive on. This alarm occurs when one of these disks does not exist or has the wrong type. The correct type for a disk: fixed, removable, or network. |
102:Disk size | Error when computing the free disk space | ||
103:VIDEO folder | The VIDEO folder is not present | ||
104:Number of disks=0 | No disks were selected in Intellect for recording the video archive. | ||
105:Disk error | An unknown disk error was received from Agent Of Control | ||
UPS signal | 1000:PowerChute started 1001:PowerChute stopped 1002:Connection restored 1003:Power restored 1004:Self-Test passed 1005:Administrative shutdown 1006: Shutdown canceled 1007:Battery charged 1009:Battery changed 1013:Allowed overload 1014:RTC Started 1015:RTC Finished 1016: Shutdown in process 1102:Normal temperature 2000:Power is off 2001:Shutdown performed 2002:Low power 2003:Battery discharging 2004:RTC Aborted 2007:High power 3000:Connection lost 3001:Overload 1004:Self-Test not passed 3003:Battery discharged 3004:Connection lost - battery 3016:Change battery 3107:High temperature | ||
Video system software | Software error | Core software | intellect.exe unloaded |
Base software (video) | video .run unloaded or hanging | ||
Registry | The registry does not have the data necessary for Agent Of Control to work | ||
Database | Error when connecting to the Intellect database | ||
Size of archives | Small archive size | Archive 1 | The archive depth requirements are not met (see Info on archives). |
Cameras | Camera is off | Camera 1 | Camera is not working: there is no signal from camera or the connection is lost |
FSA | Vibration detector signal | Vibration detector | The four sensors that cannot be renamed on Agent Of Control i. e. they must be used according to their names (Vibration detector, Lock, etc.). |
Lock sensor signal | Lock | ||
Overheat detector signal | Overheat detector | ||
Additional sensor signal | Additional sensor | ||
Additional sensor signal | EXT. SENSOR | 12 sensors whose names must be renamed on Agent Of Control These names are shown in the Device column. By default, the following line will be shown: EXT. SENSOR | |
Computer restarted normally | Computer | Logged off from Windows normally before restarting | |
Computer restarted abnormally | Computer | The computer was restarted without logging off from Windows correctly (power off) |
...
The alarms tracked by the monitoring Monitoring PSIM system can be of two types:
...
- No connection with object;
- No connection with monitoring Monitoring PSIM agent;
- Disk failure;
- Software error;
- Small archive size;
- Camera is off;
- Object disarmed (this alarm type becomes available when you activate the special mode of Monitoring PSIM operation with ACFA IntellectPSIM (see Configuring the special mode of Monitoring PSIM operation with ACFA IntellectPSIM), or when you enable the object status monitoring Monitoring PSIM on the Agent of Control side (see Configuring alarms for monitoring Monitoring PSIM the object state on the Agent Of Control side).
Overview
Content Tools