Page History

Data gateway is needed when live video is transmitted from Agents of Of Control to Additional workplaces/Additional workplaces of Of CSC in another subnet and Monitoring PSIM software components are not united in the distributed video surveillance system, as so as in this case Video gate object cannot be used.

The Data gatewayGateway objects are created on the computers with Server of Of Control/CSC installed. The number of the Data gateway objects must be equal to the number of Agent of Of Control to receive live video from. For example, if there are 10 Agents of Of Control, then create 10 Data Gateways with Local port and Remote IP-address corresponding to those Agents of Of Control.

In this section, the description of Data gatewayGateway configuration is given. By default, this module is not enabled for live video transmitting to Additional workplaces/Additional workplaces of Of CSC. In order to enable Data gateway, set the View Viewing live video through the gate in gateway in the Monitoring PSIM interface object settings panel – see see Configuring the Monitoring interface object.

Data gatewayGateway object configuration is performed as follows:

1. Create the Data gatewayGateway object based on the Computer object on the Hardware tab of the System settings dialog box (1).
   Image Modified
2. In the Local port field enter the number of the port in the system for connection of Additional workplace/Additional workplace of Of CSC  (21).
3. In the Remote IP-address field enter IP-address of the Agent of Of Control (32).
4. In the Remote port field enter the standard port of the Agent of Of Control intended to transmit live video (43). Do not change the default value in most cases. It is to be changed only if by some reason the system uses intermediate server with port forwarding.
5. Click Apply (54).

Data gatewayGateway configuration is completed.