Page History

...

1. Go to the configuration panel for the Partition Of Control object.
   
2. Click the Monitoring PSIM... button. The Add/Edit events for Monitoring window opens.
   
3. To add an event, click the Add... button. The event configuration window opens.
   
4. In the form that appears, from the Type drop-down list (1), select the type of device. This list contains the types of all objects created on the Hardware tab of the System settings window that have recorded events.
   Example: In the case of the Abandoned Object Detection Tool, select the Detector Zone type.
5. From the Number drop-down list (2), select an ID number for the object of the selected type from which you want to get events. If you want to get events from all devices of this type, leave this field blank.
6. From the Event drop-down list (3), select the event type. The available event types depend on the selected object type. System type of the event in brackets is for use in scripts and programs (see Programming Guide and Programming Guide (JScript)).
   For example, for the Abandoned Object Detection Tool triggering event, select Alarm in the zone (MD_START).
7. From the Group of alarms drop-down list (4), select an alarm group and indicate in which alarm group you want for Monitoring PSIM to display alarms for this event.

8. It is possible to get confirmation of alarm acceptance from the Server Of Control. To do this, from the Confirmation drop-down list (5), select the type of confirmation:

   1. No – no confirmation is sent.
   2. Simple – Agent Of Control sends confirmation when an alarm is confirmed by the operator.
   1. Complex – when accepting an alarm the operator must confirm it in the confirm box and after that the confirmation is sent.

   Info
   title Note.
   The Agent Of Control sends the "Confirmed: Monitoring PSIM event" message to Axxon PSIM core when there is the confirmation of alarm acceptance on the Server Of Control. Scripts that use this event can be created in Axxon PSIM – see Sample scripts for processing alarm confirmations. Confirmation sending can be disabled on the sideofthe Server Of Control  – see Sending confirmations of alarm acceptance.

   
   

9. If it is necessary to attach video data to alarms, click the Video data button (6). As a result, the Select configurations for video data transmitted window will open.

   Info
   title Note
   Configuration of the transmitted video data is described in the section Setting up the configurations for transferred video data

   
   

   1. Move the required configurations using the button (1) from the left list to the right. Remove a configuration from the right list to the left one by using the button (2).
      

      Note
      title Attention!
      Multiple configurations cannot be used for the same camera.

      
      

   2. Click the Apply changes and close button (3). The selected configurations will be listed in the non-editable Video data field.
10. In the Message field (7), enter the text message, that will appear in the Device column of the Alarm Reaction dialog form (see the document Monitoring PSIM Software Package: Operator's Guide).
    

    If the object identifier is not specified, the following variables can be used in the Message field to detail the message:

    1. <id> – identifier of the object from which the event came.

    2. <name> – the object name.

       Note
       title Attention!
       <id> and <name> are to be in lower case. After substitution of variables values the message must not be longer than 60 characters. If the resulting message is longer, extra characters will be dropped.

       
       

       Info
       title Example.
       When the Disarmed event appears at the Camera 1, the “Camera 1 disarmed” message is sent.

       
       

11. To search for additional information in messages from a device of this type (for the substring "param0<>"), select the Capture detailed data check box (8).
12. Click OK to save changes (9).

...