The ARH-ContainersRailway module object settings panel contains the following interface elements.
The Main settings tab:
The following table describes the elements of the ARH-Containers Railway module object settings panel.
| № | Parameter name | Parameter setting method | Description | Data type | Default value | Value range |
|---|
| 1 |
Symbol height| The General settings group |
Average field | Enter in text field average height of the symbol in pixels| work sequence of SDKs | - | Sequential | Sequential—the SDKs work sequentially Parallel—the SDKs work in parallel |
| Quality |
Pixels | 32 | >=0 | Minimum field | Enter the value in the text field | Sets the |
minimum height of the symbol in pixelsPixels | 28| image quality of the carriage numbers, starting from which the numbers will be recognized. The value is determined experimentally | Percent | 60 | >=0 |
Maximum| Recognition frame rate, fps |
field | Enter the value in the text field | Sets the |
maximum height of the symbol in pixelsPixels | 40| number of the frames per second processed by the recognizer. If you enter 0 or leave the field blank, the recognizer will process the maximum possible number of frames | FPS | - | >=0 |
| 2 |
Slope (%) field | Enter the value in the text field | Sets the slope of the container LP number in relation to the video image received from the camera in percent. The value is positive if the horizontal axis of the LP symbols is tilted down when viewed from left to right, and negative if this axis is tilted up. | Percent | 1 | <>=0 |
| The SDK selection table |
| Us | Click the mouse button | Determines if the corresponding SDK is going to be used for recognition | List | - | - |
| Name | Automatically | The SDK name | List | - | - |
| Type | Automatically | The SDK type of recognition | List | - | - |
The SDK tab:
Image Added
| № | Parameter name | Parameter setting method | Description | Data type | Default value | Value range |
|---|
| 1 | The Symbol height group |
Minimum |
| Min. contrast field | Enter the value in the text field | Sets the estimated difference between the shades of gray of the LP symbols and the background. | Shades of gray | 15 | >=0 |
X in Y (%) field
| Enter the value in the text field |
Sets rate horizontal symbol resolution to the vertical one in percent. The horizontal resolution is the ratio of the symbol width on carriage number symbol in the video image |
to its actual width, and the vertical resolution is the ratio of the symbol height on the video image to its real height. If you put Zero or negative value, then the value will automatically changed to 100.Percent | 100Delayfield | Enter the value in the text field |
Sets the time interval in milliseconds that should expire in order for the recognition module to display the next number recognition result. A value of zero means no delay. | Milliseconds | 1000 | >=0 | | Sets the average height of the carriage number symbol in the video image from the camera | Pixels | 32 |
3 | Quality field | Enter the value in the text field | Sets the image quality of the container numbers, starting from which the numbers will be recognized. The value is determined experimentally. | Percent | 60Recognition frame rate, fpsfield | Enter the value in the text field |
Sets number of frames per second that will be processed by the recognizer. If you enter 0 or leave the field empty, the recognizer will process the maximum possible number of frames.| maximum height of the carriage number symbol in the video image from the camera | Pixels | 40 |
FPS | -4 group field | Enter the value in the text field | Sets the average |
slope inclination of the symbol |
in percent. The value is positive if the horizontal axis of the LP symbols is tilted down when viewed from left to right, and negative if this axis is tilted up |
.fieldthe minimum slope | Enter the value in the text field |
Sets Sets the minimum inclination of the symbol |
in percent. The value is positive if the horizontal axis of the LP symbols is tilted down when viewed from left to right, and negative if this axis is tilted up |
.
| Percent | -30
| <>=0
|
| Maximum (%) |
field | Enter the value in the text field | Sets |
the maximum slope the maximum inclination of the symbol |
in percent. The value is positive if the horizontal axis of the LP symbols is tilted down when viewed from left to right, and negative if this axis is tilted up |
.| 5 | Checksum test group |
| 6 symbols checkbox | Set the checkbox | Enables the check of the checksum of the numbers that consist of 6 symbols | - | Yes | Yes - the check is enabled No - the check is disabled |
| 8 MOCO symbols and 4 signs checkbox | Set the checkbox | Enables the check of the checksum of the numbers that consist of 8 symbols | - | Yes | Yes - the check is enabled No - the check is disabled |
| 10 signs checkbox | Set the checkbox | Enables the check of the checksum of the numbers that consist of 10 symbols | - | Yes | Yes - the check is enabled No - the check is disabled |
| 11 signs checkbox | Set the checkbox | Enables the check of the checksum of the numbers that consist of 11 symbols | - | Yes | Yes - the check is enabled No - the check is disabled |
| Russian wagon number checkbox | Set the checkbox | Enables the check of the checksum of the Russian container numbers | - | No | Yes - the check is enabled No - the check is disabled |
6 | | 3 | The Advanced settings group |
Slope (%)
| Enter the value in the text field | Sets the slope of the carriage number in relation to the video image received from the camera. The value is positive if the horizontal axis of the LP symbols is tilted down when viewed from left to right, and negative if this axis is tilted up | Percent | 1 | <>=0 |
Min. contrast
| Enter the value in the text field | Sets the estimated difference between the shades of gray of the LP symbols and the background | Shades of gray
| 15 | >=0 |
X in Y (%)
| Enter the value in the text field | Sets the ratio of the horizontal and vertical symbol resolution. The horizontal resolution is the ratio of the symbol width on the video image to its actual width, and the vertical resolution is the ratio of the symbol height on the video image to its real height. If you enter zero or a negative value, then the value will automatically changed to 100 | Percent | 100 | >=0
|
| Delay | Enter the value in the text field | Sets the time interval in milliseconds that should expire in order for the recognition module to display the next number recognition result. A value of zero means no delay | Milliseconds | 1000 | >=0 |
| 4 | The Filters group |
| ISO filter |
ISO filter checkbox | Set the checkbox | Enables the ISO |
container | carriage numbers filtering. When reading a number that consists of 11 symbols, the recognition module will attempt to read the ISO code (examples of ISO codes: GB4310, 22G1) |
.YesYes - Set—the filtering is enabled |
No - the filtering Clear—the filtering is disabled |
| Long code filter |
checkbox | Set the checkbox | Enables the long numbers filtering. If the video image does not contain the |
container | carriage number, but contains some other text, the recognition module can display a |
false container | false carriage number. The long numbers filtering reduces the likelihood of the false |
numbers | codes appearing, increases the runtime (by about 5%), and degrades the recognition of |
the container | the carriage codes on the images with |
a container | a carriage code (by about 0.5%) | - |
YesYes - Set—the filtering is enabled |
No - the filtering Clear—the filtering is disabled |
| Checksum test | Set the checkbox | Enables the testing of the checksum of the numbers | - | Clear | Set—the testing is enabled Clear—the testing is disabled |
