Page History

...

1. Go to the Train detection control settings panel.
   
2. Click the Settings button. The Detection settings windows will open.
3. Specify the surveillance area on the video image:
   1. Click the Stop video button to capture the video image (1).
      
   2. Click the Surveillance territory button (2).

   3. On the captured video image (3) sequentially specify , sequentially specify nodal points of area to be analyzed by clicking the left mouse button (1). It is possible to add only one area.  While When attempting to add the second area, the first one will be deleted. After area specifying, the remaining part of video image will be darkened.
      

      Info
      title Note.
      To remove the area, click the the button next to the Surveillance territory button.

      
      

      Info
      title Note.
      The surveillance The surveillance territory is to should be specified in such a way as to be no any motion in it except of the train motionthat except for the train movement, there is no other movement.

      
      

      Note
      title Attention!
      Setting the Surveillance territory is a mandatory requirement for the detection module operation.

      
      

4. Go to the Setting tab (4) and do the following:
    
   1. In the Number of processed frames per second (0.016-100) field (5), set the number of frames per second that will be processed by the detection tool.

   2. Click the OK button to save to save the changes and return to the control settings panel of the the Train detection (6).

      Info
      title Note.
      To return to the control settings panel of the Train detection without saving the changes, click the Cancel button.

      
      

5. Click Click the Apply button on the Train detection control settings panel.

Configuring the Train detection module is complete.