Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

SIP terminal

Registry sectionString parameterAvailable valuesDefaultProduct versionParameter in effect
x32: (x32)\SIP\
x64: (x64)\SIP\
CallTimeout>0300004.11.2 and later

The key sets the time period in milliseconds after which the call is hang up if there is no answer. If redirecting is configured, then the call is redirected after the hanging. See also Configuring numbers of SIP-terminal

The key should be created on Server only

x32: (x32)\SIP\
x64: (x64)\SIP\
WaitAnswerSlaves>=0104.11.2 and later

The key sets the period of time in seconds during which the servers are inquired about the state of the operators after Intellect is loaded, after which the SIP-panel displays the list of the operators with their current state

x32: (x32)\SipPanel\
x64: (x64)\SipPanel\
LastOperator>=0-4.11.2 and later

The key displays the number of the SIP-operator who was last authorized on the local server

x32: (x32)\SipPanel\
x64: (x64)\SipPanel\

NotEndCallWhenDeactivate0, 104.11.2 and later

Disables the SIP-device disconnection if during a call the screen with the SIP-panel is hidden or changed.

0 – when you hide or change the screen, the connection with the SIP-device ends

1 – when you hide or change the screen, the connection with the SIP-device does not end

x32: (x32)\SipPanel\
x64: (x64)\SipPanel\
wavCallLooped0, 104.11.3 and later

The key enables the playback looping of the audio file "There is an unanswered call" when the operator is called.

0 – the audio file is played once, looping is disabled

1 – looping is on, the audio file is played continuously until the the response period expires

x32: (x32)\SipPanel\
x64: (x64)\SipPanel\
wavWaitLooped0, 104.11.3 and later

The key enables the playback looping of the audio file "Call on hold" when the call is on hold between the operators or between the operator and the device.

0 – the audio file is played once, looping is disabled

1 – looping is on, the audio file is played continuously until the call is continued or ended

x32: (x32)\SipPanel\
x64: (x64)\SipPanel\
wavTryingLooped0, 104.11.3 and later

The key enables continuous playback of long beeps when calling the device.

0 – continuous playback of long beeps is disabled

1 – long beeps are played continuously until the timeout expires

x32: (x32)\SipPanel\
x64: (x64)\SipPanel\
wavBusyLoopedCount>=044.11.3 and later

The key sets the number of repetitions of short beeps when calling a busy or unavailable device.

A value of 0 or 1 means that the short beep will be played once

x32: (x32)\SIP\
x64: (x64)\SIP\
ExpiresOnlyInContact0, 104.11.2 and later

The key affects the content of messages when exchanging the data packets between the SIP terminal in Intellect and third-party devices:

0—the Expires field in the 200 OK response will be located where it was in the REGISTER request (in the main body of the request or in the Contact field)

1—the Expires field in the 200 OK response will always be located in the Contact field regardless of its location in the REGISTER request

х32: (х32)\SIP\
x64: (х64)\SIP\
ClientExpires>03604.11.3 and later

The key specifies, in seconds, the interval between sending mutual registrations of SIP-servers added via a SIP trunk. The first sending is considered the one initiated by clicking the Apply button in the Configuring SIP trunk.

TABLE OF CONTENTS

ONVIF Server

Registry sectionString parameterAvailable valuesDefaultProduct versionParameter in effect
x32: (x32)\ONVIFServer\
x64: (x64)\ONVIFServer\
PauseServiceStartMs>0-4.11.2 and later

The key sets the time period in milliseconds after which the ONVIF driver is launched after Intellect starts.

This key is required if a Video Capture Device on the same Intellect Server acts as an ONVIF client for an ONVIF server. The absence of this key in such system configuration may lead to skipped events and tracks

...