Page History

Configuring a the Axxon PSIM Biometric Identification Server server is required if the controller/terminal is configured for the Server identification system mode (see Configuring the BioSmart PV-WTC terminal).

...

...

The Biometric Identification Server is set as followsTo configure the Axxon PSIM Biometric Identification server, do the following:

1. Go to the settings panel of the Biosmart Palm Vein head object BioSmart parent object.
   Image Modified
   
2. In the Identification Server server group, select Yes from the Use drop-down list (1).
3. In the Local IP field (2) field, enter the local IP address of the Axxon PSIM Biometric Identification Serverserver.
4. In the Local port field (3) field, select the local port number of the Axxon PSIM Biometric Identification Serverserver.

5. From the Matching accuracy drop-down list (4) drop-down list , select the precision of matchingmatching accuracy of the palmprint and the palmprint stored in the controller/terminal: Maximum (default), High, Normal, Low, Lower, Minimum.

   Info
   title Note
   The higher the matching accuracy of the match, the longer it takes to check the matching of the palm patternpalmprint, but the safety security is higher.

   
   

6. Set the Anti-fake checkbox (5) to enable protection of biometric readers from bringing objects other than the palm of the hand (so that the controller does not react, for example, on palm photo).
7. Click the Apply button to save changes (4).

...

1. the changes.