Page History

Configuring You can configure the BioSmart UniPass controller and the Biosmart PV-WTC terminal can be performed both automatic and manual creationboth when objects are created automatically and manually.

For this, do the following:

1. Go to the settings panel of the Biosmart Unipass or Biosmart BioSmart PV-WTC object , which that is created on the basis of the Biosmart Palm VeinBioSmart object.
   Image Modified
   
2. From the Working Mode mode drop-down list (1), select the controller / terminal operation mode , which that corresponds to the serial number of the terminal operation model in the web interface.
3. From the Number of templates per user drop-down list (2), select the number of possible patterns templates of the user's palm vein pattern that can be used to identify the user. Up to 10 templates are available for each user.
4. From the Time without getting queries drop-down list (3), select the time period in seconds and if there are no requests from the server for this period, after which the connection with the server will be forcibly disconnected if there are no requests from the server.
5. From the System mode Identification mode drop-down list (4), select the system operation mode:
   1. Network - an operation —operation mode in which access to the controller / terminal is assigned from the manufacturer's utility software BioSmart Studio v5. Hand Palm patterns are stored in the controller / terminal memory.
   2. Local - operating —standalone operation mode of BioSmart PV-WTC2 terminal which is not supported in the current version of integrationWTC terminal. Differs from the Network operation mode by the database storage logic.
   3. Server identification - a —operation mode of operation in which palm images templates are stored on an external biometric identification server instead of the controller or terminal local memory. In this mode, comparison of biometric data is performed on an external server, which allows you to expand the number of images templates and increase the speed of identification. The following parameters of the external Biometric Identification Server must be specified:
      1. In the Host IP field (1), enter the IP - address of the Biometric Identification Server.

      2. In the Host port field (2), enter the port of the Biometric identification Server.
         Image Modified

         Note
         title ImportantAttention!
         If the Server identification mode is used, then the Identification Server must be configured on the head object (see Configuring the Biometric Identification Server).

         
         

6. Click the Save configuration button to write the settings to the controller / terminal (see BioSmart configuration management).
7. Click Apply (5).

...

1. the Apply button.