Versions Compared

Old Version 2

changes.mady.by.user Alina Luchkina

Saved on

compared with

New Version 3

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To configure the action, do the following:

  1. Configure the conditions to start a macro (see Configuring filters for event-driven macros).
  2. Select a PTZ device that you want to use from the PTZ list (1). Any PTZ cameras can be used, including those from other Servers (if they are on).
  3. Select the preset (2) to which you want to switch when a macro is triggered.
  4. Set the rotation speed of the camera (3). The value should be in the range [1; 100].

  5. Set the control priority of the camera (4). The priority determines the user with which access level (see Creating and configuring roles Roles) will take over the control of the camera when the macro is running. 

  6. Set time (5). If the macro is running and the user has a lower access level than the macro, the user will be able to control the PTZ camera only after this time has elapsed.

...