Page History

...

1. Go to the settings panel of the Virdi Input object, which is created on the basis of the Virdi ACU object.
   Image Modified
2. From the Input number drop-down list (1), select the input number from 1 to 4.
   Image Added
3. From the Input type drop-down list (2), select the input type:
   • Unused - —not used.
   • Egress (NC) - —input with normally-closed contacts.
   • Egress (NO) - —input with normally-open contacts.
   • Fire (NC) - —fire input with normally-closed contacts.
   • Fire (NO) - —fire input with normally-open contacts.
   • Security (NC) - —security input with normally-closed contacts.
   • Security (NO) - —security input with normally-open contacts.
4. From the Activ. time (for egress) drop-down list (3), select the time in seconds during which the door will be opened when the Egress (NC) or Egress (NO) input is triggered: from 0 to 255.
5. In the Param (lock/part/...) drop-down list (4):
   • If the input type Egress (NC) or Egress (NO) is selected, then select the number of the door that will be opened when this input is activated: from 1 to 4.
   • If the input type Fire (NC) or Fire (NO) is selected, then select the section number in which the fire alarm will be triggered when this input is activated: from 1 to 4.
   • If the input type Security (NC) or Security (NO) is selected, then select the partition number that will be armed/disarmed when this input is activated: from 1 to 4.
6. Click the Apply button (5) to Image Added button to apply the settings.

...

1. .