Go to documentation repository
Page History
...
- Go to the Biosmart Mini tab.
From the Identifier type drop-down list (1), select which identification algorithms will be used by the reader: Fingerprint or card (default), Card and fingerprint, Fingerprint or SmartID card.
Info title Note The Scanner type parameter is filled in automatically and isn’t editable.
- From the Recognition rate drop-down list (2), select the probability of false identification by fingerprint: 1/10000, 1/100000, 1/1000000, 1/10000000, 1/100000000, Auto. Normal mode, Auto. Strict mode, Auto. The strictest mode. The recommended value is 1/100000.
- From the Acceptable angle drop-down list (3), select the maximum acceptable angle of rotation of the fingerprint from the scanner axis in degrees: 15°, 30°, 45°, 60°, 75°, 90°. The default value is 15°, the recommended value is 30°.
- From the Recognition speed drop-down list (4), select the algorithm of fingerprint recognition: Normal, Fast Mode 1, Fast Mode 2, Fast Mode 3, Fast Mode 4, Fast Mode 5, Auto. The higher the recognition speed, the greater the probability of false access denial. It is recommended to use the Auto value. In this mode the speed will be determined automatically depending on the number of fingerprint templates in the controller database.
- From the Sensitivity drop-down list (5), select the sensitivity level of the scanner when scanning fingerprints: Low, Normal, High.
- From the Card reader drop-down list (6), select the Off value to disable the embedded RFID card reader. By default, the reader is enabled (On).
- Click the Apply button to save the changes.
...
Overview
Content Tools