Page History

...

To configure the Hikvision SADP, do as follows:

1. Go to the settings panel of the Hikvision 26X object configuration panel.
   Image Modified
2. Press Click the SADP Operationsoperations Image Added button. The SADP Settings Setup window openssettings setup window will open.
   
   
3. In the Password field (1), enter a new password for the Hikvision controller.
4. Check Set the Overwrite Password password in Axxon PSIM (2) box checkbox to automatically overwrite the old password in the ACFA PSIM integration module with the new one; , otherwise you need to do it manually (refer to see Network settings of the Hikvision controller/terminal).
5. Check Set the Activate (3) box checkbox to activate the controller in case it has been reset to factory settings. The password entered on step 3 becomes the master password for the Hikvision controller.
6. Check Set the Setup Network Parameters (4) box network parameters checkbox to enable changing the network settings.
7. Check Set the DHCP box (5) to checkbox to enable DHCP.
8. In the IP address field (6), enter the new IP address of the Hikvision controller.
9. In the Port field (7), enter a new connection port number for of the Hikvision controller.
10. In the Subnet mask field (8), specify the mask for a subnet where in which the Hikvision controller will be located.
11. In the Gateway field (9), specify the connection gateway for of the Hikvision controller.
12. Check Set the Overwrite IP Settings settings in Axxon PSIM box (10) checkbox to automatically overwrite the old network settings in the ACFA PSIM integration module; , otherwise you need to do it manually (refer to see Network settings of the Hikvision controller/terminal).
13. Click the OK button to apply save the SADP settings.

...

1. Click the Apply Image Added button on the settings panel of the Hikvision controller to save the changes.