Page History

To set up the LPR channel object, specify the main camera for LP number recognition, and an additional synchronous camera, if necessary.

The main recognition video camera is directed at the driving traffic lane. The additional video camera covers the same area as the main video camera, but it can be mounted in another place. Two video cameras can be controlled synchronously using scripts or macros.

...

To select the video cameras, do the following:

1. Go to the settings panel of the LPR channel object settings panel, corresponding to the activated module module (see Activating the software module used for identifying the plates).
   

2. From the License plates LP recognition drop-down list (1), select a required Camera object (the main camera for LP number recognition).

   Info
   title Note
   The same camera can be used for variousLPR channels.

   
   

3. From the Synchronous recordingshooting drop-down list (2), select a required Camera object (the additional synchronous camera). To get a contextual frames from an ANPR camera, you must select the same camera that is selected as the main one.

   Note
   title Attention!
   Frames from the synchronous video camera are recorded only if continuous recording is enabled on both video cameras.

   If it is necessary for the LPR channel to consider the vehicle's movement direction as Entry to the territory, set the Entry checkbox (3).

   Info
   title Note
   This setting is taken into account in the WEB Report System PSIM when working with Auto reports (see WEB Report System PSIM. User Guide).

   
   

4. Click the Apply button (

   4

   3).

The camera selection is completed.