Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

NVIDIA GPU에는 여러 널리 사용되는 코덱에 대해 완전히 가속화된 하드웨어 기반 비디오 디코딩을 제공하는 하드웨어 기반 디코더(NVDEC라고 하는 칩)가 포함되어 있습니다. 전체 디코딩이 NVDEC로 오프로드되면 그래픽 카드와 CPU를 다른 작업에 사용할 수 있으며 클라이언트에 표시되는 비디오 카메라 수를 늘릴 수 있습니다.

또한 서버에서 실행되는 NVDEC 전용 하드웨어 비디오 디코더가 있는 경우 분석 및 감지 목적으로 RAM을 우회하여 GPU로 직접 비디오 스트리밍을 가져올 수 있습니다 (

NVIDIA GPUs contain a hardware-based decoder (a chip referred to as NVDEC) which provides fully-accelerated hardware-based video decoding for several popular codecs. With complete decoding offloaded to NVDEC, the graphics card and the CPU are free for other operations and you can increase the number of video cameras displayed on the Client.

In addition, if you have the NVDEC dedicated hardware video decoder running on Servers, you can get video streaming directly to GPU (see Detection tools implementation on processors) for analysis and detection purposes, bypassing RAM 참고).

Note
titleAttention!

Axxon One VMS에서는 NVDEC 칩을 사용하여 다음을 디코딩합니다.

  1. 다음 코덱으로 압축된 비디오: 

In Axxon One VMS, the NVDEC chips are used to decode:

  1. Video compressed with the following codecs: H.264, Н.265 and MPEG-2.In Live Video, Archive Video, and TimeCompressor.
  2. 라이브 비디오는 아카이브 비디오 및 TimeCompressor


Note
titleAttention!

Before you start, please make sure to install the latest driver for your NVIDIA GPU시작하기 전에 NVIDIA GPU용 최신 드라이버를 설치했는지 확인하세요.


Info
titleNote

Please see the list of supported devices for the NVDEC chips on the NVIDIA official website.

When decoding with NVDEC, the following limitations apply:

  1. Maximum video resolution for H.264 − 4096x4096.
  2. Maximum video resolution for H.265 − 8192x8192.
  3. The maximum total frame rate per second for the H.264 codec is 648 fps.

To enable decoding with NVDEC, do as follows:

NVIDIA 공식 웹사이트에서 NVDEC 칩 지원 장치 목록을 참조하세요.

NVDEC로 디코딩하는 경우 다음 제한 사항이 적용됩니다.

  1. H.264 – 4096x4096의 최대 비디오 해상도
  2. H.265 – 8192x8192의 최대 비디오 해상도
  3. H.264 코덱의 초당 최대 총 프레임 속도는 648fps입니다.

NVDEC로 디코딩을 활성화하려면 다음을 수행하십시오.

  1. 설정  옵션 사용자 인터페이스Go to Settings  Options  User interface (1 2)로 이동합니다

  2. Select the Enable hardware decoding checkbox 하드웨어 디코딩 활성화 확인란(3)을 선택합니다.
  3. Click Apply적용 클릭합니다.