Page History

...

The OLXA_LINE object sends events presented in the table. Procedure is started when the corresponding event appears.

Format of event procedure for the microphone:

Code Block
OnEvent("OLXA_LINE ", "_id_","_event_")

Event	Description
"ACCU_START"	Sound activated recording ON.
"ACCU_STOP"	Sound activated recording OFF.
"ARM"	Record ON.
"DISARM"	Record OFF.
"INCOMING_NUMBER"	Incoming telephone number.
"OUTGOING_NUMBER"	Outgoing telephone number.
"REC"	Start of record.
"REC_STOP"	End of record.
"RESET"	Microphone connecting.

...

Code Block
DoReact("OLXA_LINE ","_id_","_command_" [,"_parameters_"]);

List of commands and parameters for the the OLXA_LINE object is presented in the following table:

Command – command description	Parameters	Description
"ARM" – turn on the microphone to record.	-	-
"DISARM" – turn off the record from microphone.	-	-
"SETUP" – setting of microphone parameters.	type<>	Type of line.
	accu_start <>	Operating threshold of sound detection.
	accu_stop<>	Holding time of detection triggering.
	amp<>	Gain.
	aru<>	Automatic gain control.
	aru_dyn<>	Level of AGC.
	aru_time<>	AGC attack time.
	chan<>	Number of microphone sound channel.
	compression<>	Type of compression.
	flags<>	Flags.
	name<>	Object name.
	rec<>	Start of record.

Properties of the OLXA_LINE object are given in the table.

Properties of the OLXA_LINE object	Description of properties
ID<>	Object ID.
PARENT_ID<>	Parent object ID.

Check function of the The OLXA_LINE object state:

Code Block
CheckState("OLXA_LINE","number","state")

The OLXA_LINE object can be in the following states:

.

Examples of using events and reactions of the Microphone object:

...

.

...

Code Block
OnEvent("OLXA_LINE","1","accu_start") //enable sound activated recording { DoReact("OLXA_LINE","1","ARM"); //disable record from microphone }

Set minimal compression on microphone while disabling record of audio signal.

...

Page tree