Go to documentation repository
Page History
...
The TELEMETRY_EXT object sends events presented in the table. Procedure is started when the corresponding event appearsoccurs.
Event | Description of event | Parameter | Description of parameterRange of values | Value range |
"KEY_PRESSED" | Key is pressed | param0<> | Code of pressed key | See Installing and configuring security system components guide. |
device<> | Device on which key is pressed | 0 – Main keyboard 0—AXIS T8312 , main keyboard 1 - —AXIS T8313 keyboard | ||
"KEY_RELEASED" | Key is released | param0<> | Code of released key | 0..21 for AXIS T8312. For BOSCH KBD-Digital, BOSCH KBD-Universal and Panasonic WV-CU950 see Installing and configuring security system components guide. |
device<> | Device on which key is released | 0 – Main keyboard —AXIS T8312, main keyboard 1 – Rotary switch —AXIS T8313 rotary switch | ||
"MOVED" | Position is changed | param0<> | Bias value | For wheel of JogDial rotary switch -1.. 1; for wheel of frame-by-frame scrolling Shuttle -7..7 For keyboard Panasonic WV-CU950 JogDial -1.. 1; Shuttle -6..6 |
device<> | Type of used control mechanism AXIS T8313 | 0 – —wheel of rotary switch, 1 – —wheel of frame-by-frame scrolling |
List of commands and parameters for the TELEMETRY_EXT object is presented in the following table:
Command – —command description | Parameters | Description |
"DRAW_FIGURE" – —draw a figure on display of of BOSCH KBD-Digital or BOSCH KBD-Universal telemetry panel | display<> | 0x00 – —main display, 0x01 – status —status display |
x1<> | Start coordinate on X axis (from 0 to 127 for main display, from 0 to 121 for status display) | |
y1<> | Start coordinate on Y axis (from 0 to 239 for main display, from 0 to 31 for status display) | |
x2<> | End coordinate on X axis (from 0 to 127 for main display, from 0 to 121 for status display) | |
y2<> | End coordinate on Y axis (from 0 to 239 for main display, from 0 to 31 for status display) | |
is_fill<> | 0 – —do not fill the figure, 1 – —fill the figure | |
is_set_pixels<> | 0 – —remove figure from display, 1 – —draw figure | |
figure<> | 0 – —line, 1 – —rectangle | |
"PRINT_TEXT" – —print text on display of BOSCH KBD-Digital or BOSCH KBD-Universaltelemetry panel | display<> | 0x00 –main —main display, 0x01 – status —status display |
x<> | Coordinate on X axis (from 0 to 127 for main display, from 0 to 121 for status display) | |
y<> | Coordinate on Y axis (from 0 to 239 for main display, from 0 to 31 for status display) | |
charset<> | Coding: 0 – —Latin 1 – —Cyrillic 2 – —Central europeanEuropean | |
style<> | Style: 0 – —Normal 1 – —Semi-bold | |
text <> | Test message | |
"PRINT_TEXT" – —print text on display of Panasonic WV-CU950telemetry panel | y<> | 0 – —display text on the first line 1 – —display text on the second line |
text<> | Entered Displayed text of a line, maximum 20 symbolscharacters | |
flickering<> | Line consists of 6 symbols characters determining parameters of text flashing: d1 d2 d3 d4 d5 d6 d1 determines period of flashing : 0 – —flashing disabled 1 - —period 0.25 sec, symbol character is changed replaced by white space 2 - —period 0.5 sec, symbol character is changed replaced by white space 3 - —period 0.75 sec, symbol character is changed replaced by white space. 4 - —period 1 sec, symbol character is changed replaced by white space. 5 - —period 0.25 sec, symbol character is changed replaced by white dark space 6 - —period 0.5 sec, symbol character is changed replaced by white dark space 7 - —period 0.75 sec, symbol character is changed replaced by white dark space 8 - —period 1 sec, symbol character is changed replaced by white dark space d2: 1 – symbols —characters from 1 to 4 are flashing, 0 – —these symbols character are not flashing. d3: 1 – symbols —characters from 5 to 8 are flashing, 0 – —these symbols characters are not flashing. d4: 1 – symbols —characters from 9 to 12 are flashing, 0 – —these symbols are characters are not flashing. d5: 1 – symbols —characters from 13 to 16 are flashing, 0 – —these symbols characters are not flashing. d6: 1 – symbols —characters from 17 to 20 are flashing, 0 – —these symbols characters are not flashing. | |
"CLEAR_DISPLAY" – —clear display of BOSCH KBD-Digital or BOSCH KBD-Universal telemetry panel. Reaction without parameters for the Panasonic WV-CU950 telemetry panel. | display<> | 0x00 – —main display, 0x01 – status —status display |
"RELE_ON" – —turn on the light on the AXIS T8312 keyboard or Panasonic WV-CU950panelCU950 panel | rele<> | Code of key with the light, 12..16 for AXIS T8312. For Panasonic WV-CU950 see Installing and configuring security system components guide, section Features of Panasonic WV-CU950 control panel configuration and operation. |
"RELE_OFF" – —turn off the light on the AXIS T8312 keyboard or Panasonic WV-CU950 panel | rele<> | Code of key with the light, 12..16 |
"RESET" – —reset of Panasonic WV-CU950 panel | type<> | 0 – —instant reset 1 – —reset after 100 ms. 2– 2—reset after 200 ms. 3– 3—reset after 500 ms. 4– 4—reset after after 1 s. |
"SET_ALARM" – —set type of alarm signal of the Panasonic WV-CU950 panel | audio_alarm<> | 0 – —sound OFFis off 1 – —simple single alarm signal 2 – —simple double alarm signal 3 – —simple triple alarm signal 4 – —single alarm signal lasting 0.1 sec. 5 – —single alarm signal lasting 0.2 sec. 6 - —single alarm signal lasting 0.3 sec. 7 - —single alarm signal lasting 1 sec. 8 – —simple single tone 9 – —simple double tone A– A—simple triple tone B– B—single signal lasting 0.1 sec C– C—single signal lasting 0.2 sec D– D—single signal lasting 0.3 sec E– E—single signal lasting 1 sec F – —alarm signal |
Overview
Content Tools