Page History

...

1. In the list of devices, click Create and select Email notifier.
   Image RemovedImage Added

2. Click the Apply button.

...

1. In the list of devices, select the Email notifier object which needs to be configured (1).
   Image RemovedImage Added
2. Activate the Email notifier object by selecting Yes in the Enable list (2).
3. In the Name field (3) enter the required name of the E-mail notifier object.

4. Select the mode for sending the E-mail notifications: through AxxonNet or through the specified SMTP Server (4).

   Note
   title Attention!
   To send notifications through AxxonNet, you should connect to it (see Configuring a domain in AxxonNet). AxxonNet has a limit of 10 messages a day.

   
   

   Info
   title Note
   Message through AxxonNet will be sent within a minute.

   
   

5. Configure the SMTP Server, if this mode was selected (5):

   1. In the Outgoing mail server field, enter the outgoing E-mail SMTP Server.
   2. In the Password field, enter the password of the user account on the outgoing E-mail Server.
   3. In the Port field, enter the number of the port used by the outgoing E-mail Server.

   4. In the SSL certificate field, specify the path to the SSL certificate file, if you use this protocol. If no certificate is specified, but the Use SSL parameter is enabled, then the E-mail Server certificate will be used.

   5. If you need to use SSL-encrypted connection when connecting to the outgoing E-mail Server, select Yes from the Use SSL list.
   6. In the Name field, enter the name of the user account used to send messages on the outgoing E-mail Server.

6. In the From field, enter the E-mail address from which the messages will be sent (6).

   Note
   title Attention!
   When using email notification, E-mail Servers may disable the user account or deny authentication in some cases. We recommend you to disable all security parameters in your email account beforehand.

   
   

7. In the Recipients field (7), enter one or several E-mail addresses to which messages will be sent.

8. Click the Apply button.

...

To check the E-mail notification from the Email notifier object, send a test message by clicking the Test button.
Image AddedImage Removed
When you do this, the following message will be sent to the E-mail address specified in the Recipients field (see Configuring the E-mail notifier object): "Test message".