Page History

Debug mode is a special operation mode when the Debug window is open, and is designed for analyzing the progress of Axxon PSIM software operation and for prompt debugging in case errors occur. Log files are created in this mode—they are stored on the disk for a specific time period. 

Enabling debug mode

By default, debug mode is disabled. To enable debug Starting with hotfix 1.0.1.172, the Debug 4 mode is enabled by default. In previous versions, the Debug mode is disabled by default. To enable the Debug mode, do the following::

1. Shut down Axxon PSIM.
2. Start the Tweaki.exe utility (see the Starting and shutting-down the Tweaki.exe utility)
3. Select the Axxon PSIM node in the tree on the left side of the utility dialog box.
4. Change the parameter Debug Modemode from None Disabled to Debug 1, Debug 2, Debug 3 or Debug 4 (see description of modes in The Settings panel of the Windows Axxon PSIM section).
5. Click the OK button.
6. Start Axxon PSIM.
   The Debug window item will appear in the Axxon PSIM main control menu.
   
7. Select Debug window in the main control menu to open the Debug window. The selected item will be marked with a tick.
   

...

Configuring log file parameters

You can set log keeping parameters both on the Axxon PSIM setting panel in the Tweaki.exe utility (see The Settings panel of the Axxon PSIM section) and using some registry keys:

...