Page History

...

The Equipment detection (PPE)module is configured as follows:

1. Go to the Detection settings tab (1) settings panel of the  Equipment detection (PPE) object settings panel, to the Detection settings tab.
   
2. In the Min person height, % (2) and  and Min person width, % (3) fields fields, enter the minimum height and width of a person in the frame as a percentage of the frame height/width. Objects smaller than the specified size will not be detected.
3. In the Frames processed per second second [0,.016, 100] field (4), set the number of frames per second that will be processed by the detection tool.

4. In the Number of frames for analysis and output field (5), enter the minimum number of frames on which a violation should must be detected in order to generate a trigger. The value should must be in the range [2; 20] range.

5. By default, the detection triggering is generated for each equipment violation. If it is necessary to generate a trigger One event per equipment element checkbox is set, and the detection tool triggers once for each equipment item element violation within a whole person's track, then clear the One event per equipment element checkbox (6). If you want the detection tool to trigger each time an equipment violation occurs, clear the checkbox.

   Info
   title Note
   Example. A person appeared in the frame without a helmet, then put it on and then took it off again. If the One event per equipment element checkbox is set, then there will be one trigger, if not—two.

   
   

   
   

   
   

6. Set the Show objects on image checkbox (7) if checkbox if it is necessary to highlight the detected object with a frame on the image in the Monitor interface object window.

7. Set the Save tracks to show in archive checkbox (8) to checkbox to save the track in the archive.
   

   Info
   title Note
   The frame on the image of the detected object is saved in the Monitor object archive.

   
   

8. From the Working mode drop-down list (9), select the device on which the neural network will operate. Default The default value is CPU.

9. Set the PPE detection checkbox to detect the presence of personal protective equipment (PPE). By default, the checkbox is clear.

10. Click the Settings button (10) button. The Detector Detection settings window will open.
    

11. Click the Stop video button (1) to capture a frame of the video image.
12. Click the Area of interest button (2) to specify the area of detection. The button will be highlighted in blue.
    Image Added
13. On the captured video frame, sequentially set the anchor points of the area in which the objects will be detected by left-clicking the mouse button (3).
    Image Removedbutton. The rest of the frame will be faded. There can be only one area of interest. To delete the area, click the Image Added button. Selecting the area of interest is mandatory for the operation of the detection tool.
14. Click the OK button (4)to close the Detection settings window and return to the settings panel of the detection tool.
15. Go to the the Network settings tab (1).
    Image RemovedImage Added
16. Select the segmenting neural network file (21).
17. Select one or several files of the classification neural network (32). Each classification neural network detects equipment on a specific body segment.
18. Click the Apply button (4) to button to save the changessettings.

The Equipment detection (PPE)module is now configured.

...