Page History

...

The E-mail Email notifier object is used to configure the electronic messages, which then can be sent to the user when a macro or an automatic rule is triggered.

Creating the

...

Email notifier object

To create the E-mail Email notifier object, do the following:

...

The E-mail notifier object will appear in the list of devices.

Configuring the

...

Email notifier object

To configure the E-mail Email notifier object, do the following:

1. In the list of devices, select the Email notifier object which needs to be configured (1).
   
2. Activate the Email notifier object by selecting Yes in the Enable list (2).
3. In the Name field (3) enter the required name of the E-mail Email notifier object.

4. Select the mode for sending the E-mail Email notifications: through AxxonNet or through the specified SMTP Server (4).

   Note
   title Attention!
   To send notifications through AxxonNet, you should connect to it (see Configuring a domain in AxxonNet). AxxonNet has a limit of 10 messages a day.

   
   

   Info
   title Note
   Message through AxxonNet will be sent within a minute.

   
   

5. Configure the SMTP Server, if this mode was selected (5):

   1. In the Outgoing mail server field, enter the outgoing E-mail Email SMTP Server.
   2. In the Password field, enter the password of the user account on the outgoing E-mail Email Server.
   3. In the Port field, enter the number of the port used by the outgoing E-mail Email Server.

   4. In the SSL certificate field, specify the path to the SSL certificate file, if you use this protocol. If no certificate is specified, but the Use SSL parameter is enabled, then the E-mail Email Server certificate will be used.

   5. If you need to use SSL-encrypted connection when connecting to the outgoing E-mail Email Server, select Yes from the Use SSL list.
   6. In the Name field, enter the name of the user account used to send messages on the outgoing E-mail Email Server.

6. In the From field, enter the E-mail Email address from which the messages will be sent (6).

   Note
   title Attention!
   When using email notification, E-mail Email Servers may disable the user account or deny authentication in some cases. We recommend you to disable all security parameters in your email account beforehand.

   
   

7. In the Recipients field (7), enter one or several E-mail Email addresses to which messages will be sent.

8. Click the Apply button.

Configuration of the E-mail Email notifier object is now complete.

Checking

...

Email notification

To check the E-mail Email notification from the Email notifier object, send a test message by clicking the Test button.

When you do this, the following message will be sent to the E-mail Email address specified in the Recipients field (see Configuring the E-mail notifier object): "Test message".