Page History

The device state is described by a specific number of variables-channels.  The A channel can have both digit and string values.A channel is configured on a numeric and a text value. 

To configure a channel, do the following:

1. Go to the settings panel of the SNMP C

...

1. hannel object created on the basis of the SNMP Device object.
   Image Modified

Configure a channel as follows:

1. Enter In the Channel OID field, enter the channel ID (1). 
   
   The
   
   

   Info
   title Note
   You must enter the value of channel ID

   is to be specified

   without the value of

   device ID (see Connecting a device via the SNMP protocol). 
   For instance, the full channel ID is 1.3.6.1.4.1.318.1.1.12.1.6.0 where

   device ID

   is in bold

   .

    
2. If required necessary, select a rule Rule with which the channel is to will comply with (2, see see Configuring rules). 
3. From the Type drop-down list, select data type: Null, OctetString, Integer, OID, Gauge, Counter32, IpAddress, TimeTicks, Counter64, UnsignedInteger, Opaque (Float), Opaque (Double).
4. Set the Value chaged (3) chaged checkbox checked if you don't want to display events about changed the channel value are not to be displayed change in the Event logViewer. 
5. Clear the Indicator modification checkbox if you want to display If the channel value is to be presented as text on the map set the Analog params (4) checkbox uncheckedin text form.
   

   Note
   title Attention!
   Changed values of this parameter are applied after after you restart the Axxon PSIM Server restart Server.

6. Set the Custom events (5) events checkbox checked if events are not to be displayed you don't want to display events in the Event log Viewer when the a rule triggers.
7. Set In the GET request group, set the Enable checkbox in the GET Request group to enable SNMP GET requests (6).
8. In the the Repeat interval field, specify the time period in seconds to repeat after which GET requests (7)are sent.
9. Click the the Apply button (8)to save the changes.

Device channel configuration is now completed.