Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

감시 창의 크기를 조절할 수 있습니다.

이 작업은 다음 세 가지 방법 중 하나로 수행할 수 있습니다.

  1. 활성 감시 창의 오른쪽 상단에 있는 버튼을 사용
  2. 상단 패널의 버튼을 사용
  3. 마우스를 사용

감시 창을 클릭하면 오른쪽에 크기 조절 버튼이 표시됩니다.
Image Added

  1. Image Added감시 창의 크기를 한 단계 늘립니다.

  2. Image Added감시 창의 크기를 재설정합니다.

감시 창을 확대하면 전체 레이아웃의 규모가 커집니다. 일부 셀은 화면에서 이동합니다.

감시 창은 다음과 같이 확대됩니다.

  1. 감시 창이 레이아웃의 어느 한 면의 100%를 차지하는 경우(최대 감시 창 크기)에는 확대할 수 없습니다.
  2. 감시 창이 레이아웃의 어느 한 면의 50% 이상(그러나 100%는 아님)을 차지하는 경우, 가능한 한 최대한 확대됩니다.
  3. 감시 창이 레이아웃의 양쪽에서 50% 미만을 차지하는 경우, 감시 창은 두 단계로 확대됩니다. 첫 번째 단계에서는 감시 창을 레이아웃의 해당 쪽에서 50%로 확대하고, 두 번째 단계에서는 감시 창을 최대 크기로 확대합니다.
Info
titleNote

세 번째 경우는 9개 이상의 셀이 포함된 레이아웃에 적용됩니다.

감시 창이 다른 감시 창이나 정보 게시판에 연동된 경우, 첫 번째 확대 단계(최대 50%)에서 감시 창과 다른 창/정보 게시판이 함께 표시되어 한쪽 화면 전체를 차지합니다

The scale of the surveillance window can be adjusted.

This can be done in one of three ways:

  1. Using the buttons in the upper right-hand part of the active surveillance window.
  2. Using the buttons in the top panel.
  3. Using the mouse.

If you click a surveillance window, you can see the size control buttons on the right-hand side. 
Image Removed

  1. Image Removed − increases the size of the surveillance window by one step.

  2. Image Removed − resets the size of the surveillance window.

When a surveillance window is enlarged, the scale of the entire layout is increased. Some of the cells are moved off the screen.

Surveillance windows are enlarged as follows:

  1. If a surveillance window occupies 100% of any of the sides of the layout (maximum surveillance window size), it cannot be enlarged.
  2. If a surveillance window occupies 50% or more (but not 100%) of any of the sides of the layout, it is enlarged as much as possible.
  3. If a surveillance window occupies less than 50% on both sides of the layout, it is enlarged in two steps: the first step enlarges the surveillance window to 50% on the corresponding side of the layout and the second step enlarges the surveillance window to the maximum size.
Info
titleNote

The third case applies to layouts that contain nine or more cells.

If a surveillance window is linked to another one or an information board, at the first enlargement step (to 50%), the surveillance window and the other window/information board are displayed together and occupy all of the screen on one side

Info
titleNote

In this case, the first step takes into account the total size of the related cells: the related cells must be less than 50% of both sides of the layout.

Also, if you click a surveillance window, you can control its size with the buttons on the top panel:
Image Removed

  1. Image Removed − esets the size of the surveillance window.
  2. Image Removed − resizes the window up to 50% on one side of the layout.
  3. Image Removed − maximizes the size of the surveillance window.

How to resize the surveillance window using a mouse:

이 경우, 첫 번째 단계에서는 관련 셀의 총 크기를 고려합니다. 관련 셀은 레이아웃 양쪽의 50%보다 작아야 합니다.

또한 감시 창을 클릭하면 상단 패널의 버튼을 사용하여 크기를 제어할 수 있습니다.
Image Added

  1. Image Added감시 창의 크기를 설정합니다.
  2. Image Added레이아웃의 한쪽 면을 기준으로 창 크기를 최대 50%까지 조정합니다.
  3. Image Added감시 창의 크기를 최대화합니다.

마우스를 사용하여 감시 창 크기를 조정하는 방법 :

  1. 전체 화면 모드에서는 아무 곳이나 클릭하면 창이 최소화됩니다. 
  2. 그렇지 않은 경우, 창 내부를 두 번 클릭하면 전체 화면 모드로 표시됩니다

...

  1. .