| Port | Service | Open port | Comment |
|---|
80 (Windows) 8000 (Linux) | Web-Server (see Configuring the Web-Server) | Required | - Before installation, make sure that port 80 is free in the system. By default, port 80 is used by the Web-Server in Windows OS (
see - see Configuring the Web-Server).
- If you install via HTTP, AxxonData
will - will be installed without encryption using port 80. In this case, to web access AxxonData and add Servers to it, you must open port 80 from Client devices or from the connected Axxon One
Server- Server. If port 80 is busy (for example, if the Axxon One
Server - Server is running at the time of installation), you will be prompted to use port 8082.
- If internet access is limited on the Server, for the stable operation of AxxonData, you must allow access to the websites ocsp.digicert.com and ctldl.windowsupdate.com via TCP port 80
|
443 (Linux and Windows) | nginx | Required | - Before installation, make sure that port 443 is free in the system. If you install via HTTPS, a standard AxxonData installation will be performed using a certificate on port 443
|
8081 8082 (Linux and Windows) | Not required | - You cannot
install - install AxxonData together
with - with Axxon PSIM,
because - because the CassiniService service is started
during - during Axxon PSIM
installation- installation. This service runs on port 8081, the same port as the nginx service
of - of AxxonData.
- If you install via HTTP and port 80 is busy, the installation will be performed on port 8082. You must provide public access to this port.
- For the correct operation of AxxonData, you must open port 8082 from
Client devices - Client devices or from the connected Axxon One
Server- Server. Otherwise, the Web-Client in AxxonData won't be available
|
4222 8222 (Linux and Windows) | nats-streaming-server | Not required | — |
5432 (Linux) 25432, 5432, 5433 (Windows) | postgresql-10-ac | Not required | — |
| 8705 (Linux and Windows) | writer | Not required | — |
| 8001 (Linux and Windows) | uploader | Not required | — |
8000 8080 8888 8889 8890 9006 9999 (Windows) | axxondataaxxondata | Not required | - Before installation, make sure that port 8080 is free in the system. By default, port 8080 uses the Virtual input (see Configure virtual inputs). If port 8080 is busy, the domain synchronization with AxxonData isn’t possible.
- If AxxonData is installed on port 8082,
you - you must provide public access to port 8888
|
8701 8706 8780 8789 8790 8999 (Windows) | reports | Not required | — |
| 8703 (Windows) | exporter | Not required | — |
| 8701 (Linux) | backend | Not required | — |
8123 9000 (Linux) | clickhouse | Not required | — |
| 8706 (Linux) | dictionary | Not required | — |
8000 8080 (Linux) | local-backend | Not required | — |
| 8789 (Linux) | query | Not required | — |
| 8780 (Linux) | supplier | Not required | — |
