Page History

...

General information

The software module for the License plate recognition (VT) in Plate Recognition VT in Axxon One is licensed by the processed video channels and by countries (see License Plate Recognition plate recognition VT).

Installing the Sentinel LDK Run-time environment

To install the Sentinel LDK Run-time environment, do the following:

...

Installation of the Sentinel LDK Run-time environment is complete. Together with the Sentinel LDK Run-time environment, a standard demo license for searching the recognized license plates in the archive will be installed. When you use this license, note that there is a 30-second delay between the recognition of a license plate and the appearance occurrence of a corresponding event (see Vehicle number license plate recognition and search).

Installing a hardware key

To ensure the hardware key operation, it is necessary to connect the hardware key to the Server where you plan to use the License plate recognition (Plate Recognition VT). If the Sentinel LDK Run-time environment is successfully installed, the license is automatically recognized by Axxon One and it is ready to use.

...

The installation of the hardware key is now complete.

Installing a software key

...

1. Upload the hasp_SDK_2.14.tar.gz environment to the Server on which the license software key will be used.

2. Unpack Unzip the archive.

   Code Block
   sudo tar zxvf ~/hasp_SDK_2.14.tar.gz -C ~

3. Create a snapshot of the Server hardware. A snapshot is a file with the c2v extension. The created file fingerprint.c2v will be located in the current directory.

   Code Block
   cd ~/hasp/bin

   1. for 64-bit system:

      Code Block
      sudo ./hasp_update_x86_64 f > fingerprint.c2v

   2. for 32-bit system:

      Code Block
      sudo ./hasp_update f > fingerprint.c2v

4. Give Submit the created file with the c2v extension to the AxxonSoft manager.

5. Get a v2c file from the AxxonSoft manager. The received file will contain license information that will be available for use only on your Server.

6. Activate the license to install a software key.

   1. for 64-bit system:

      Code Block
      cd ./hasp/bin

      Code Block
      sudo ./hasp_update_x86_64 u <Received file with the v2c extension>

   2. for 32-bit system:

      Code Block
      cd ./hasp/bin

      Code Block
      sudo ./hasp_update u <Received file with the v2c extension>

7. After you activate the license, restart the hasplmd service:
   

   Code Block
   sudo systemctl stop hasplmd.service

   Code Block
   sudo systemctl start hasplmd.service

   or restart the Server:

   Code Block
   sudo reboot

   
   

...

The installation of the software key is now complete.

Updating the license

To update the license, do the following:

1. Create a snapshot of the Server hardware. A snapshot is a file with the c2v extension. The created file haspinfo.c2v will be located in the current directory.

   Code Block
   cd ~/hasp/bin

   1. for 64-bit system:

      Code Block
      sudo ./hasp_update_x86_64 i <HASP ID> > haspinfo.c2v

      where <HASP ID>
      

      Code Block
      hasp_update_x86_64 lf

   2. for 32-bit system:

      Code Block
      sudo ./hasp_update i <HASP ID> > haspinfo.c2v

      where <HASP ID>
      

      Code Block
      hasp_update lf

2. Give Submit the created file with the c2v extension to the AxxonSoft manager.

3. Get a v2c file from the AxxonSoft manager. The received file will contain license information that will be available for use only on your Server.

4. Update the license.

   Code Block
   cd ./hasp/bin

   1. for 64-bit system:

      Code Block
      sudo ./hasp_update_x86_64 u <Received file with the v2c extension>

   2. for 32-bit system:

      Code Block
      sudo ./hasp_update u <Received file with the v2c extension>

5. After you update the license, restart the hasplmd service:
   

   Code Block
   sudo systemctl stop hasplmd.service

   Code Block
   sudo systemctl start hasplmd.service

   or restart the Server:

   Code Block
   sudo reboot

   
   

...

The update of the license is now complete.

Removing a license

To remove a license, do the following:

...

The removal of the license is now complete.

Checking a license

You can check the current license status on the Server. To do this, open the Sentinel Admin Control Center web application. The license information is displayed on the Features tab.

If there is no Web web browser on the Server, execute the following two commands in the console one by one:

...