Page History

To configure the connection of the Sigur server connection to ACFA PSIM, do the following:

1. Go to the settings panel of the Sigur server object.
   

2. In the Server parameters IP field (1), enter specify the IP address of the Sigur server.
3. In the DB password field (2), specify the password to access the Sigur ACS database, if you use the Sigur server version 1.1.1.53.s and older. For earlier versions, leave the field blank.
   You can change or set the database password in the manufacturer's software (see the official reference documentation for the Sigur ACS).

   
   

   Info
   title Note
   The following information is displayed in the area (23): DB version— the version —version of the Sigur ACS database;Interface version — the version of the data exchange protocol between Sigur server and ACFA PSIM; Port— the port used for the —port used to connect the Sigur server -and ACFA PSIM connection.

4. In the Synchronization Username (34) and Username Password (45) fields, enter the username and password, respectively, used to login to the Sigur ACS Client software (see the official reference documentation for the Sigur ACS).

5. From the Workmode drop-down list (56), select the operation mode of the Sigur server:

   • Full capacity— configurationconfiguration, management and monitoring are available.

   • Monitoring— only only management and monitoring are available. Also, the Synchronization and management of Sigur ACS configuration and Configuring the Sigur user access cards will be are unavailable.

6. Click the Apply button to save the changes (67).

The Sigur server connection to ACFA PSIM is now configured.